Submittal Sheet

Slab Sensor for Aerial Snow Sensor
Submittal Information
Revision A: July 29, 2014
Project Information
Job Name:
Location:
Part No. Ordered:
Engineer:
Date Submitted:
Contractor:
Submitted By:
Manufacturer’s Representative:
Approved By:
Technical Data
Sensor material:
Controller compatibility:
Temperature range:
Sensor:
HDPE sleeve, 40 ft. (12m) HDPE jacketed wire
Single-zone Snow Melt Control (A3040654)
only when using with Uponor Aerial Snow
Sensor (A3040095)
-60 to 140
O
F (-51 to 60
O
C)
NTC thermistor, 10k ohm at 77°F (25°C)
Product Information and Application Use
The Slab Sensor for Aerial Snow Sensor (A3040073) is designed to
measure temperature under exterior snow melting slabs. It features a
high-density polyethylene (HDPE) sleeve which is designed for use in
conduits, soils or concrete, as it is suitable for direct burial. This product is
supplied with 40 ft. (12m) of 2-conductor cable. Accessories include the
Uponor Single-zone Snow Melt Control (A3040654) and Uponor Aerial
Snow Sensor (A3040095).

Description
Part Number
Sensor Width
Sensor Length
Cable Length
Weight
Slab Sensor for Aerial Snow Sensor
A3040073
⅜" OD (11mm)
1½" (38mm)
40 ft. (12m)
0.4 lbs.
Installation
Fasten terminal connectors on the Single-zone Snow Melt Controller. Refer to the Uponor Single-zone Snow Melt Controller Installation
and Operation Manual for more information.
Standards
Class II wiring
Codes
N/A
Listings
N/A
Related Applications
Contact Information
Radiant Heating and Cooling Systems
Snow and Ice Melting Systems
Permafrost Protection Systems
Turf Conditioning Systems
Uponor, Inc.
5925 148
th
Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponorpro.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponorpro.com