Overview of Primary Product

Radiant Ready 30E Installation Guide
1
Section 1
Overview
The Radiant Ready 30E
TM
(A3503000) is a complete
radiant mechanical room designed in a compact,
preassembled, easy-to-install panel. The unit, which
includes a boiler, manifold, pump, expansion tank,
pressure-relief valve, isolation valves, thermostat and
air vent, is already wired, plumbed, tested and ready to
be installed. Simply attach the panel to a wall, connect
the radiant loops, attach the thermostat and connect
the 240V electrical power.
DO NOT use methanol or ethylene glycol
in the Radiant Ready 30E. These fluids
may damage the components.
Important! The standard unit does not
come with an ASME H-stamp. If your
jurisdiction requires this listing, please
contact Uponor Technical Services.
[e-mail]
U.S.: 888.594.7726
Canada: 888.994.7726
Specifications
Weight 119 lbs.
Height 29
7
⁄8 in.
Width 27
3
⁄4 in.
Depth 13 in.
Heat output 30,710 BTU/9 kW
System volume 2.12 gallons
Connection threads R20
Power requirements 240 VAC, 50 Amps
Number of loops 5 (customize to add additional loops)
Pressure relief 30 psi
Expansion tank 2 gallons
Expansion tank connection
1
⁄2" MNPT
Pump (three speed) Grundfos® UPS15-58F 120VAC +/-
10%, 50/60Hz, <1A, 1/25 HP
Figure 1-1: Radiant Ready 30E Internal Components
Expansion Tank
Boiler
Boiler Control
Temperature and Pressure Gauge
Temperature and Pressure Relief Valve
Return Manifold
Circulating Pump
Supply Manifold
Automatic Air Vent
Uponor Heat-only
Thermostat (A3030101)
Isolation Valves
Expansion Tank