Submittal Sheet

Metal Bend Supports
Submittal Information
Revision A: Feb. 5, 2008
Project Information
Job Name:
Location:
Part No. Ordered:
Engineer:
Date Submitted:
Contractor:
Submitted By:
Manufacturer’s Representative:
Approved By:
Technical Data
Material:
SPHC steel
Product Information and Application Use
The Uponor Metal Bend Supports are designed to provide extra support
in 90-degree bends of Uponor crosslinked polyethylene (PEX) tubing.

Description
Part
Number
A
B
Weight
⅜" Metal Bend Support
½" Metal Bend Support
⅝" Metal Bend Support
¾" Metal Bend Support
A5110375
A5110500
A5110625
A5110750
3.05"
3.60"
5.00"
6.55"
R-1.80"
R-2.00"
R-2.80"
R-4.80"
0.10 lbs.
0.10 lbs.
0.21 lbs.
0.32 lbs.
Installation
Snap the tubing into the Metal Bend Support at the beginning of the bend. Continue the bend through the support and snap the tubing into
the support at the end of the bend. Refer to the Uponor AquaPEX
®
Professional Plumbing Installation Guide or the Uponor Radiant Floor
Heating Installation Handbook for additional information.
Standards
N/A
Codes
N/A
Listings
N/A
Related Applications
Contact Information
PEX-a Plumbing Systems
Radiant Heating and Cooling Systems
Fire Safety Systems
Uponor, Inc.
5925 148
th
Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponor-usa.com
Uponor Ltd.
2000 Argentia Road, Plaza 1, Suite 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponor.ca