Submittal Sheet

PEX Rails
Submittal Information
Revision B: May 1, 2009
Project Information
Job Name:
Location: Part No. Ordered:
Engineer: Date Submitted:
Contractor: Submitted By:
Manufacturer’s Representative: Approved By:
Technical Data
Material: Polyethylene (post consumer products)
Product Information and Application Use
Plastic PEX Rail secures Uponor PEX tubing products to metal and
wood-support structures. Note: Suitable fastening hardware is
required (not included).
9
Description
Part
Number
A B C D Weight
½" PEX Rail, 6.5 ft. A5700500 78.0" 1.875" 1.000" 1.500" 1.50 lbs.
⅝" PEX Rail, 6.5 ft. A5700625 78.0" 2.000" 1.000" 1.500" 1.50 lbs.
¾" PEX Rail, 6.5 ft. A5700750 78.0" 2.000" 1.000" 1.500" 1.50 lbs.
Installation
Lay out the tube rails parallel with the floor joists (perpendicular to the tubing layout direction). Space the rails 12 inches from the
edge of the wall and 36 inches on center thereafter. Fasten the rails to the subfloor using 1" wood screws, liquid nails, or silicone.
Refer to the Uponor Radiant Installation Handbook for additional information.
Standards
N/A
Codes
N/A
Listings
N/A
Related Applications Contact Information
Radiant Heating Systems
PEX-a Plumbing Systems
Fire Safety Systems
Uponor, Inc.
5925 148
th
Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponor-usa.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponor.ca