Manualshelf

Submittal Sheet

ManualsBrandsUponor ManualsHeating Supplies1-1/2" Pre-Insulated Wirsbo hePEX w/ 2" Insulation, 50 ft coil
1
1
ProPEX
®
is a registered trademark of Uponor, Inc. ProPEX
™
is a trademark of Uponor Ltd.
Pre-insulated Wirsbo hePEX™(ASHRAE 90.1-2013)
Submittal Information
Revision A: June 19, 2015
Project Information
Job Name:
Location:
Part No. Ordered:
Engineer:
Date Submitted:
Contractor:
Submitted By:
Manufacturer’s Representative:
Approved By:
Technical Data
Service Pipe:
Crosslinked polyethylene PEX-a Engel method pipe
Insulation:
Polyethylene foam
Thermal Conductivity:
0.25 Btu.in/h/sq.ft/°F
Operating Condition Limits:
(hydrostatic ratings)
200°F at 80 psi (93°C at 5.5 bar)
180°F at 100 psi (82°C at 6.9 bar)
73.4°F at 160 psi (23°C at 11 bar)
Linear Expansion Rate:
1.1"/10°F per 100' (27.94mm/5.56°C per 30.48m)
Product Information and Application Use
Pre-insulated Wirsbo hePEX™ features oxygen-barrier PEX pipe encased in
polyethylene-foam insulation to meet ASHRAE 90.1-2013 energy-code
requirements for hydronic piping and radiant heating/cooling applications.
The piping is approved for direct burial in soil provided it is not exposed to
groundwater. Uponor recommends adding ½" of insulation to accommodate
for foam compression in direct-burial applications.
Part No.
O.D.
Heat Loss
(at 70°∆T)
R-Value
Coil Size
(O.D. x Width)
Weight
(lb./coil)
A6140500
A6140750
A6141000
A6141250
A6141500
A6142000
A6150500
A6150750
A6151000
A6151250
A6161500
A6162000
A6160500
A6160750
A6161000
A6161250
A6171500
A6172000
1.81"
2.06"
2.31"
2.56"
2.81"
3.31"
2.59"
3.08"
3.09"
3.34"
4.93"
5.27"
3.77"
4.02"
4.27"
4.52"
5.88"
6.22"
7.4 Btu/hr/ft
9.0 Btu/hr/ft
10.6 Btu/hr/ft
12.1 Btu/hr/ft
13.6 Btu/hr/ft
16.5 Btu/hr/ft
6.3 Btu/hr/ft
7.1 Btu/hr/ft
8.8 Btu/hr/ft
10.0 Btu/hr/ft
7.0 Btu/hr/ft
8.6 Btu/hr/ft
4.0 Btu/hr/ft
4.9 Btu/hr/ft
5.7 Btu/hr/ft
6.4 Btu/hr/ft
5.2 Btu/hr/ft
6.4 Btu/hr/ft
3.9
3.6
3.4
3.3
3.2
3.1
7.5
7.9
6.4
6.1
11.2
9.9
13.8
12.5
11.6
11.0
15.4
13.7
40" x 6.5"
40" x 6.5"
42" x 9"
44" x 9"
46" x 9"
46" x 13.5"
45" x 9"
43" x 13.5"
45" x 13.5"
52" x 9"
54" x 13.5"
58" x 13.5"
58" x 9"
58" x 13.5"
57" x 13.5"
58" x 13.5"
58" x 13.5"
59" x 13.5"
8.0 lbs.
12.8 lbs.
21.0 lbs.
30.0 lbs.
42.0 lbs.
65.0 lbs.
11.0 lbs.
22.0 lbs.
30.2 lbs.
39.2 lbs.
49.5 lbs.
74.3 lbs.
22.0 lbs.
29.0 lbs.
37.5 lbs.
46.3 lbs.
56.3 lbs.
81.3 lbs.
Installation
Use ProPEX
®1
fittings to connect the piping. Refer to the Uponor Radiant Floor Heating Installation Handbook for additional information.
Standards
CSA B137.5; ASTM F876; ASTM F877; ASTM F1960; ASTM F2023; DIN 4726/9; NSF/ANSI 14; NSF/ANSI 61
Codes
HUD; ICC; IMC; UMC; IPC; UPC; NSPC; IRC; NBC of Canada; NPC of Canada; UFGS
Listings
CCMC; cNSFus-rfh; cNSFus-pw; CSA; ETL; IAPMO; ICC-ES; ITS; PPI TR-4; UL; WH
Related Applications
Contact Information
Radiant Heating and Cooling Systems
Snow and Ice Melting Systems
Permafrost Protection Systems
Turf Conditioning Systems
Uponor, Inc.
5925 148th Street West
Apple Valley, MN 55124 USA
Phone: 800.321.4739
Fax: 952.891.2008
www.uponorpro.com
www.uponorengineering.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: 888.994.7726
Fax: 800.638.9517
www.uponorpro.com
www.uponorengineering.com

Summary of content (1 pages)