Technical data

CLIMATE CONTROLLER C-46 - INSTALLATION AND OPERATION MANUAL
16
The following screen is displayed as default in basic access level:
6.2 Installation wizard
When the Climate Controller C-46 is started the very first time, it
will guide the operator to make the necessary primary settings of
the system.
The installation wizard is also started after changing or resetting
the operating mode.
6.2.1 Language
1. Use the and keys to
select the preferred
language.
2. Press OK to display the
next screen, see section
6.2.2
Set time and date.
6.2.2 Set time and date
1. Use the and keys to
change the highlighted
setting.
2. Use the and keys to
move to the next field.
3. Press OK to display the
next screen, see section 6.2.3
Operating mode
6.2.3 Operating mode
1. Use the and keys to
select the Operating
Mode.
Depending on the
configuration of the
Climate Controller C-46,
the following operating modes are available:
• Heating
• Heating + Cooling
• Cooling
• Meltaway
2. Press OK to display the next screen, see section 6.2.4
Heating, page 16, 6.2.5 Cooling, page 17, or 6.2.6 Meltaway,
page 17.
6.2.4 Heating
The screen Heating: Sensors Used is displayed if either
Heating or Heating + Cooling mode has been selected in the
previous screen.
The Supply sensor is selected by default and cannot be
unselected.
One to three sensors can be selected, including the default
Supply sensor.
Pos. Icon Description
1 Basic access level
Installer access level
2Supply
or
Measured Supply temperature in most
Heating and all Cooling operating modes
Indoor
or
Measured Indoor temperature in Heating
– indoor controlled mode
Idle
Melting
Idle or Melting in Meltaway operating
mode
3 Power-on indicator
• On = Climate Controller C-46 is
powered on
• Flashing = Climate Controller C-46 is in
standby mode
4 Heating mode indicator
Cooling mode indicator
5 Mixer valve
Mixer valve is opening
Mixer valve is closing
6 Supply circuit pump operating
Supply circuit pump standby
Supply circuit pump not managed
7 Comfort mode
Economy mode
Pos. Icon Description