Technical data

CLIMATE CONTROLLER C-46 - INSTALLATION AND OPERATION MANUAL
37
3. Move the time cursor along the time scale with the and
keys until the required 30-minutes time interval is reached.
4. Modify the mode setting from comfort to economy, or the
other way around, using the and keys.
5. Repeat steps 3. to 4. until the ECO profile is modified as
required.
6. Press OK to display the
next screen, Supply
setback temp.
Note: If an indoor sensor
is used, the screen
displayed is Indoor
setback temp.
7. Select the required setback temperature.
• Default setting, supply: 2 °C
• Default setting, indoor: 4 °C
• Setting range, supply and indoor: 0–10 °C
• Setting accuracy: 1°C
8. Press OK to confirm the new setting.
8.11 Alarms
The alarms menu allows displaying either the battery alarms only
or a complete alarms list.
8.11.1 All alarms
The All alarms screen displays all unresolved alarms and an entry
to clear the alarms.
Alarm list
To display the alarm list:
1. Navigate through the screens using the navigation keys:
Uponor > Main menu > Alarms > All alarms > Alarm list
Example screen:
Clear alarm list
To clear the alarm list:
1. Navigate through the screens using the navigation keys:
Uponor > Main menu > Alarms > All alarms > Alarm list
2. Select Clear alarm list.
Example screen:
3. Select Yes or No and
press OK.
Note that only resolved
alarms can be cleared.
8.11.2 Battery alarms
To display the Battery alarm list:
1. Navigate through the screens using the navigation keys:
Uponor > Main menu > Alarms > Battery alarms >
Battery alarm list
Example screen:
To clear the Battery alarm list, see section
Clear alarm list, page
37.
8.12 General settings
The following screens are accessible from the General settings
menu. Which of the screens that are accessible is dependent on
the access level selected for the Climate Controller C-46. See
section 8.12.1
Access level, page 38.
1. In the General settings menu, select the required item and
press OK.
• Access level, section 8.12.1, page 38
• Clock settings, section 8.12.2, page 38
• Language, section 8.12.3, page 39
• Temperature unit, section 8.12.4, page 39
• Backlight, section 8.12.5, page 39
• Log, section 8.12.6, page 39
• General purpose output, section 8.9.6, page 33
• General purpose output status, section 8.12.8, page 40
• Controller ID, section 8.12.9, page 40
• Software version, section 8.12.10, page 40
• Radio links, section 8.13, page 40
Pos. Description
1 Time setting at the time cursor position, HH:mm
2 ECO or COMF indicator at the time cursor position
3 Time cursor, 30 minute step
4 High columns indicating comfort mode (COMF)
5 Short columns indicating economy mode (ECO)
6 Time scale, every 6 hours indicated with digits, high or
short columns for every 30 minutes