Submittal Sheet

Protective Tubing Caps
Submittal Information
Revision A: July 21, 2010
Project Information
Job Name:
Location: Part No. Ordered:
Engineer: Date Submitted:
Contractor: Submitted By:
Manufacturer’s Representative: Approved By:
Technical Data
Material:
Poly(diallyl phthalate)
(PDAP)
Product Information and Application Use
The Protective Tubing Cap is used to protect tubing from debris
during the installation phase. The cap is designed for easy
installation onto and removal from the terminated ends. It is not
intended for permanent applications.
9
Description Part Number I.D. O.D. Height Weight
½" Protective Tubing Cap, 50/bag F4350500 0.625" 0.74" 1.00" 0.008 lbs.
⅝" Protective Tubing Cap, 50/bag F4350625 0.735" 0.89" 1.00"
0.008 lbs.
¾" Protective Tubing Cap, 50/bag F4350750 0.860" 1.02" 1.00"
0.011 lbs.
1" Protective Tubing Cap, 50/bag F4351000 1.120" 1.25" 1.00"
0.140 lbs.
Installation
Install protective caps on Uponor PEX tubing prior to installation to protect from debris. Do not use for pressure testing. Remove
from tubing after installation.
Standards
N/A
Codes
N/A
Listings
N/A
Related Applications Contact Information
Radiant Heating and Cooling Systems
Snow and Ice Melting Systems
Permafrost Protection Systems
Turf Conditioning Systems
Uponor, Inc.
5925 148
th
Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponor-usa.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponor.ca