Submittal Sheet

Plastic Drop Ear Bend Support
Submittal Information
Tubing Support
Revision B: April 13, 2011
Project Information
Job Name:
Location:
Part No. Ordered:
Engineer:
Date Submitted:
Contractor:
Submitted By:
Manufacturer’s Representative:
Approved By:
Technical Data
Material
Glass Reinforced Nylon
30%
Product Information and Application Use
Uponor Plastic Drop Ear Bend Supports are designed to provide a
Rigid, 90-degree bend and connection-free stub out from a stud wall or
floor for ⅜" or ½" Uponor AquaPEX
®
tubing.

Description
Part
Number
A
B
C
Weight
⅜" Plastic Drop Ear Bend Support
½" Plastic Drop Ear Bend Support
F5200375
F5200500
3.40"
3.40"
R-1.95"
R-1.95"
3.0"
3.0"
0.06 lbs
0.06 lbs
Installation
Snap the tubing into the bend support at the beginning of the bend. Continue the bend through the support and snap the tubing into the
support at the end of the bend as well. Refer to the Uponor Professional Plumbing Installation Handbook or Uponor Radiant Floor
Installation Handbook for additional information.
Standards
N/A
Codes
N/A
Listings
N/A
Related Applications
Contact Information
PEX-a Plumbing Systems
Radiant Floor Heating and Cooling Systems
Uponor, Inc.
5925 148
th
Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponor-usa.com
Uponor Ltd.
2000 Argentia Road, Plaza 1, Suite 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponor.ca