Product Overview

1
ProPEX
®
is a registered trademark of Uponor, Inc. ProPEX
™
is a trademark of Uponor Ltd.
ProPEX
®
Ring
Submittal Information
Revision D: June 8, 2012
Project Information
Job Name:
Location:
Part No. Ordered:
Engineer:
Date Submitted:
Contractor:
Submitted By:
Manufacturer’s Representative:
Approved By:
Technical Data
Material:
Engel-method Crosslinked Polyethylene (PEX-a)
Density:
926 to 940 kg/m
3
Degree of crosslinking:
70% to 89%
Product Information and Application Use
Manufactured from PEX-a material, Uponor ProPEX
®
Rings are required to make
a proper ProPEX connection.
1
The ProPEX Ring with Stop includes a leading edge
chamfer and stop edge.

Description
Part Number
Length
I.D.
O.D.
Weight
ProPEX Ring, ⅜"
ProPEX Ring with Stop, ½"
ProPEX Ring, ⅝"
ProPEX Ring with Stop, ¾"
ProPEX Ring with Stop, 1"
ProPEX Ring with Stop, 1¼"
ProPEX Ring with Stop, 1½"
ProPEX Ring with Stop, 2"
Q4690302
Q4690512
Q4680625
Q4690756
Q4691000
Q4691250
Q4691500
Q4692000
0.54"
0.63"
0.79"
0.87"
1.10"
1.35"
1.61"
1.97"
0.49"
0.63"
0.75"
0.88"
1.13"
1.38"
1.63"
2.14"
0.74"
0.87"
1.00"
1.13"
1.42"
1.66"
1.91"
2.61"
0.005 lbs.
0.006 lbs.
0.008 lbs.
0.012 lbs.
0.020 lbs.
0.030 lbs.
0.040 lbs.
0.133 lbs.
Installation
Square cut the Uponor ProPEX tubing. Remove excess material. Slide the ProPEX Ring over the end of the tubing (maximum
1
/
16
" over-hang
for rings without stop). When using the ProPEX Ring with Stop, slide the ring on the tubing with the chamfered edge first until the end of the
tubing contacts the stop edge. Expand the tubing and ring. If using the ProPEX Manual Expander Tool, rotate the tool a quarter turn after
each expansion to prevent the formation of grooves. Remove the expansion tool and fully seat the tubing and ring against the shoulder of the
fitting. Make ProPEX connections at temperatures above 5°F/-15°C. For more information, refer to the AquaPEX
®
Professional Plumbing
Installation Handbook, the AquaSAFE™ Fire Safety Installation Guide or the Uponor Radiant Installation Handbook.
Standards
ASTM F1960
Codes
IPC; UPC; NSPC; NPC of Canada
Listings
½", ¾", 1", 1¼", 1½" and 2" UL 1821 and ULC/ORD-C199P; HUD MR 1269; ICC ESR 1099; ANSI/NSF 14- and 61-certified
Related Applications
Contact Information
PEX-a Plumbing Systems
Radiant Heating and Cooling Systems
AquaSAFE Fire Safety Systems
Uponor, Inc.
5925 148
th
Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponor-usa.com
Uponor Ltd.
2000 Argentia Road, Plaza 1, Suite 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponor.ca