Installation and Operation Manual

3 Uponor Smatrix Wave PULSE system
description
Uponor Smatrix Wave is a control system designed for underfloor
heating and cooling installations. Comfort, user friendliness and
temperature control for each individual room of a home can be
combined through the various components.
3.1 System overview
Uponor Smatrix Wave consists of a controller, a communication
module (optional), thermostats, and actuators. The controller
manages the operation of the actuators when the thermostats detect
a demand for heating and/or cooling
System optimization and settings (for up to four room controllers) is
facilitated via the Uponor Smatrix PULSE app (connected via the
communication module). The system can function without the
communication module, but with reduced functionality.
Uponor Smatrix Wave is controlled by different types of thermostats.
Designed for maximum comfort, the thermostats communicate with
the room controller by radio link. It is possible to mix the different
types of Uponor Smatrix Wave thermostats in the same installation.
3.2 Example of a system
The illustration below shows Uponor Smatrix Wave with
installation and thermostats.
CD0000022
B
A
C
D
Note
The floor sensor can be connected to both thermostats
which can be used for floor temperature limitation.
For example, the maximum limitation can protect a
sensitive floor covering from exposure of too high
temperatures when there is a high heating demand. The
minimum limitation can keep a tiled floor warm even
when there is a no general heating demand for the room.
Item Description
A
B
A3800169 Uponor Smatrix Wave T-169,
C
D
A3800161 Uponor Smatrix Wave T-161
Uponor Smatrix Wave PULSE X-265, Page 7 (room controller)
Uponor Smatrix PULSE Com R-208, Page 8
(communication
module)
6
|
Uponor Smatrix Wave PULSE
|
Installation and operation manual
115v
Relay
115v Power Supply
A380265C Uponor Smatrix Pulse Controller X-265
A3801208 Uponor Smatrix Communication Module R-208