Installation manual

Uponor Control System - Installation Manual 7
Screwing the antenna onto a wall
Sticking the antenna onto a wall
3.2.2 Mounting the controller
• Position the controller just above the manifold. Check
position of 230V socket.
• Check that the cover of the controller can easily be
removed.
• Check that the connectors and switches are easily
accessible.
Connect the RJ 9 connector into the antenna
Drill the wall (Ø6 mm)
Fix anchor and screw on the wall
Let the screw protrude from the wall (3 mm)
Hang the antenna on the screw
Use the double sided adhesive strip to fix the
antenna on a smooth wall such as glazed ceramic
tiles.
Connect the RJ 9 connector into the antenna
Stick the antenna on the wall
1
2
3
4
1
2
STOP
The controller has to be mounted horizontally.
There is a risk for overheating if the controller is
mounted vertically or on a horizontal surface.
Drill the wall (Ø6 mm)
Press the anchor into the hole
Attach the controller to the wall with screws
1
2
3