Instructions / Assembly

1
Enclosure Pole User Manual
Manufactures note:
Before starting installation process please verify that you have the same amount of poles to match your legs, or that you have
two poles per leg.
Please have your trampoline leg measured in diameter to verify that it measures 1.5” to match the larger hole of the clamp.
WARNING: 2 adults in good physical condition are required for the following assembly. Wear proper shoes and maintain
balance to prevent a fall. Failure to follow all instructions and warnings exactly may result serious injury.
1. Place all parts to be used in
process of installation in front of
you.
4. Be aware that the mark on the lower pole needs to
align with the trampoline frame. If there is no line on the
pole then please have it attached 18” below the frame.
3. Once the pole is securely inserted
into the clamp you can now clasp the
leg into the larger hole of the clamp.
2. Making sure that the black plastic
of the lower pole faces down. Take
the clamp and clasp the trampoline
pole into the smaller hole of the 8-
Shaped Pole Clamp (serves as the
pole and leg connecter).

Summary of content (3 pages)