Instructions / Assembly

STEP

SECURING THE BOTTOM OF THE NET

NOTE: If you purchased a ring on top enclosure set continue to page 12.

If you purchased a straight

pole Enclosure Set use this step

Note: When installing the net make sure that the Upper Bounce logo is placed on the outside of the trampoline.

STEP-

1. Connect the net to the V-rings of the

trampoline mat using the attached clips, securing

at regular intervals. This holds the net in place for

you to complete the attachment with rope.

2. Secure one end of the rope by knotting it to

the V-ring closest on one side to the trampoline

entrance zipper.

3. Weave the rope through the net and every

second v-ring successively, moving around the

trampoline in the direction away from the

entrance zipper.

4. When you complete the weaving and reach

the other side of the entrance zipper, secure the

other end of the rope also by knotting it to the

V-ring closest to the entrance on that side.

Your trampoline safety net is now fully secured.

Follow the safety checks in the ‘Testing the

Trampoline’ section before using the trampoline net.

SECURING THE TOP OF THE NET