GOOD POSTURE STARTS HERE USER MANUAL
HOW TO GET STARTED 1. Download the UPRIGHT GO app. Search "UPRIGHT GO" or simply click on the relevant button below. 2. Follow the tutorial in the app for a step-by-step guide on how to get started.
WHAT TO EXPECT IN THE APP TUTORIAL • Set up your UPRIGHT GO with a step-by-step guide • Learn how to find your ideal upright position • Get your first daily goal And more...
TIPS FOR SUCCESS • For best results within 2 weeks, we highly recommend using the GO 2 daily • Use your GO 2 throughout your workday, in a cool indoor environment • Leave your GO 2 on your desk, in its case, as a reminder to train • Finally, don't forget to charge your GO 2
WHAT'S IN THE BOX 1. UPRIGHT GO 2 4. ADHESIVES Your personal posture Attach the GO 2 2 trainer, which measures your 4 posture 100 times a second to your upper back using the reusable silicone adhesives 1 2. CASE Store your GO 2 in the case 5. ADHESIVE REMOVAL TOOL 6 while charging it on your desk Use it to peel off your old or when you're on the go adhesive when replacing it 5 3. CHARGING CABLE 3 with a new one 6.
DEVICE SHORTCUTS Turn On Short Click Turn Off Long Click Calibration Double Click Turn the vibration feedback on/off One Click
LED INDICATORS GREEN BLUE RED Connected to the app Not connected Battery needs charging There are two additional LED indicator colors: yellow for airplane mode and purple for device update mode.
HOW TO CHARGE YOUR GO 2 Charging your battery regularly will allow you to use your GO 2 as often as you choose. • Place your GO 2 in its case for safekeeping and charge it with the USB-C cable provided. • A full charge takes about 3 hours. • Once your battery is fully charged, the LED light will turn green. • Your battery will last for ~35 hours.
ADHESIVES CARE & MAINTENANCE • With proper maintenance, each adhesive can be used about 3-10 times, depending on skin type. • Make sure your skin is clean and dry before using the GO 2. You may use the alcohol pads provided to clean your skin. • The adhesive doesn’t attach well to sweaty skin. Therefore, we recommend training indoors. • When you're not using your GO 2, store it in its case to keep the adhesive clean.
ADHESIVES REPLACING THE ADHESIVE 1. Remove the old adhesive from the GO 2. We recommend using the removal tool provided. 2. Important: Make sure you remove ALL parts of the old adhesive completely, so there’s nothing green left on your GO 2. 3. Take a new adhesive and peel off just the white cover from one side.
ADHESIVES REPLACING THE ADHESIVE 4. Attach the sticky part to the GO 2, inside the thin gray frame. 5. When you want to start using your GO 2, peel off the green cover that says “This side on YOUR BACK”. 6. Attach the GO 2 to your back.
PRODUCT SPECS Dimensions Weight Bluetooth Battery Battery life Charging cable 48x28x8.6mm ~11gr BLE-Bluetooth Low Energy 4.2 Single Cell, Lithium-Polymer, 3.7V, 150mAh, 0.
Chat with us in the app or drop us a line at hello@uprightpose.
