Installation & Assembly

3. Top xing
4. Face xing
5. Fitting the blind
6. Fitting the safety device
Simply screw the spring dips directly to the wall under
the window frame. (g. 2)
Attach the spring clips to the L shaped brackets with the small
nuts and bolts as shown, then x to the wall on frame. (g. 3)
5-1. Position the top of the headrail against the spring clips and click into place.
5-2. Please note, to remove for cleaning, etc. gently prise away the headrail from
the clips using a screwdriver. (g. 4)
The chain safety device is designed to keep loose chain out of young children’s
reach and avoid the risk of strangulation.
6-1. Pull the safety device downward to take any slack out of the chain.
To this point that the blind operates easily and the chain is not being
over tensioned. (g. 5)
6-2. Position the safety device correctly.
6-3. Secure the safety device in position using the screw provided.
2. Installing the headrail
2-1. Fit the headrail using the brackets provided.
2-2. When tting to plaster, uses the plastic wall plugs provided.
2-3. Brackets should be installed no greater than 1.5 cm from each
end with intermediate brackets spaced evenly. (g.1)
g.5