Installation & Assembly
8. Switching the ball chain
9. Care and maintenance
8 -1. See diagrams below.
The fabric may be dusted using a dry cloth. To clean, wipe with a barely damp cloth.
Steps 1- 6 Remove the caps on both sides, move the ball chain to the left and reassemble the caps.
WARNING!
Please read all safety warnings installation information fully before installation. Young children can be
strangled by loops in pull cords, chains, tapes and inner cords that operate the product. To avoid
strangulation and entanglement, keep cords out of the reach of young children. Cords may become
wrapped around a child’s neck. Move beds, cots and furniture away form window covering cords.
Do not tie cords together. Make sure cords do not twist and create a loop. The safety clips should be
positioned high enough to be out of reach of small children yet accessible to adults. All safety clips
for blinds need to be xed to a solid surface using a screw and xing suitable for the wall or surface
material. These items should not be glued or stuck in place. The head rail shall not be installed less
than 1.5m from the oor.
For further information go to: www.makeitsafe.org.uk
Keep out of the reach of young children.
Small parts – choking hazard
Please retain these instructions for future reference.
For identication mark see bottom bar.