the Farrier ASSEMBLY MANUAL 866-210-9273 YARDCRAFT.
Bring the sound of crackling flames and the smell of toasted marshmallows with you whether it’s in your backyard, to the campground, or the tailgate party! The portable Farrier Steel Fire Pit’s compact and collapsible design makes it perfect for storage and taking it on the go.
parts list Front Panel (A) Female Side Panel (B) Rear Panel (C) Male Side Panel (D) » Never allow a child to start a fire or to play near the fire. Children should always be closely supervised around a fire pit. » Always have a fire extinguisher handy. » Place or build your fire pit in a flat, open area. Avoid areas with trees, especially trees with low-hanging branches. » When possible, place your pit on concrete, dirt, or gravel.
Step 1. Begin the assembly by placing the Front (A) and Rear (C) panels approximately 18 inches apart. Step 2. Carefully slide the the Female Side Plate (B) into the channels. Step 3. Step 4. Verify Female Side Plate (B) rests at the bottom of the Front and Rear (A & C) slots. Repeat Steps 2 and 3 for the Male side plate (D), ensuring the sides seat together properly.
