Manualshelf

Instructions / Assembly

ManualsBrandsUrban Woodcraft ManualsBarn Doors40 in. x 83 in. CHARLESTION Solid Core White Wood Modern Barn Door with Sliding Door Hardware Kit
12345678910
Rail Install - CONCRETE
www.urbanwoodcraft.com - toll free: 1.855.738.1378
Prepare the mounting of the rail to the wall by marking
where the bolts should go with a pencil. Refer to the
Measurements page for making your measurements.
Predrill 5/16” holes for each of the markings you have
made. Holes should be drilled to 1 1/2” depth
Insert the Rail Bolt Anchors into the pre-drilled holes.
Sometimes a hammer is useful for this step.
Slide the Left and Right Stoppers onto the rail before
proceeding with mounting the rail. Ensure the
adjustment bolts are facing upward. Cross only the rst
hole on either side of the rail. Refer to figure 1.4
Thread the Rail Hex Bolt through the rail and then a Wall
Spacer and Tighten into Anchors with a Wrench. Repeat
this step four additional times. Refer to figure 1.5
5/16”
page 07
Barn Door - Installation Guide
fig. 1.4
fig. 1.5
(v. 0.4.092517)