User Manual

2
1
2
4
3
Work the Control Knob
On/off
Press and hold for 3 seconds
Play/pause
Click once
Next song
Push to the right
Previous song
Push to the left
Fast forward
Push to the right and hold
Rewind
Push to the left and hold
Increase volume
Push upwards
Decrease volume
Push downwards
Handle calls
– Click once to answer or hang up
– Double-click to reject an incoming call
Activate/stop Siri*
Double-click
English
How it all works
Press and hold the
control knob until
the LED blinks blue
Select Plattan 2 BT
in your device’s
Bluetooth
®
menu
Play a song and enjoy!
–
–
–
Charge first, then play
Connect your headphones to a
USB power source using the
micro USB cable. When the LED
turns green they’re ready to play
*Siri only works when paired
with an iOS or macOS device
1 2
3
4
1
2
3
Charge the battery
When there is less than 60 minutes of power left
you will hear an alert tone and the LED will blink
red. To charge, connect your headphones to a
USB power source using the micro USB cable.
2.5 hours of charging gives approximately 30
hours of cord-free play time.
What the LED indicators mean
Red Low battery
Green Fully charged
Blue Bluetooth
®
pairing mode
Off Switched off or in normal operation
Use the ZoundPlug
Use the empty 3.5 mm socket to share
your music with a friend. Just plug in a
pair of wired headphones and enjoy.
Pair with a Bluetooth
®
sound source
Begin with your headphones turned off
Press and hold the control knob for
5 seconds until the LED blinks blue
Open the Bluetooth
®
menu on your
sound source and select Plattan 2 BT
from the list of available devices
Play your first song
01