User Manual

5
CHARGING
Plug your headset into a USB power
source using the micro USB cable.
The LED indicator light is red while the
headset is charging, and white when fully
charged.
Tip: If the earbuds aren’t fitting well,
try replacing them with another size
(included).
CONTROLS
The headset has 3 buttons that let you play/pause music, pick up calls, adjust volume,
and skip tracks.
BATTERY INDICATION
See how much battery charge is left by
pressing both volume buttons at the same
time. Hold down for 2 seconds to activate
the indicator. Release to stop indicator.
HOW TO PUT THE HEADSET ON
1. Hold the Left ear hook in your left hand
and the Right ear hook in your right hand
(see markings on earbuds).
2. Place the headset behind your head
with the buttons facing outwards.
3. Place the ear hooks behind your ears.
4. Secure the earbuds inside your ears.
It may help to gently stretch your earlobes
outwards.
Tip: Using your Bluetooth headset out-
doors? For the best listening experience
keep your sound source in a chest strap,
armband, or shoulder pocket.
IMPORTANT!
When removing the earbud covers, DO
NOT pull on the loop. Instead, carefully
pinch the earbud’s nose at
the center, pull up, then peel back.
Decrease volume
Single click the Minus button
Increase volume
Single click the Plus button
Play/Pause
Single click the Play/Pause button.
Next song
Press and hold the Plus button
Previous song
Press and hold the Minus button
Pick-up/Hang-up/Reject calls
Single click the Play/Pause button
Approx. 40-100% = Slow white flashes
from the LED Indicator, and a slow
beeping sound.
Approx. 0-40% = Quick red flashes
from the LED Indicator, and a quick
beeping sound.
Pull here
STADION USER MANUAL ENG