Total Control HDA-4100 Owner’s Manual HDA-4100 Owner’s Manual
HDA-4100 Owner’s Manual Total Control Table of Contents Overview ....................................................................................................................... 1 SAFETY PRECAUTIONS ............................................................................................ 12 Features & Benefits..................................................................................................... 1 Important Safety Instructions......................................................
HDA-4100 Owner’s Manual Total Control Overview URC’s HDA-4100 Multi-Zone amplifier delivers incredible performance, reliability, and powerful amplification making it the perfect audio distribution system for any home or business. The HDA-4100 can provide audio in up to four (4) stereo zones, eight (8) mono zones, or any combination of both. The HDA-4100 Multi-Zone amplifier is designed with ICEpower technology to provide a robust, cool running distributed audio system.
HDA-4100 Owner’s Manual Total Control Parts & Pieces Included with the HDA-4100 is the following: 2
HDA-4100 Owner’s Manual Total Control Front Panel Descriptions There are three (3) LEDs on the front panel of the HDA-4100: 1. Power LED: Indicates one (1) of the following: 2. Status LED: Indicates one (1) of the following: • Solid Blue: Power has been applied to the device and it has successfully initialized. • Solid Blue: The device has been programmed with Total Control software and is ready for operation. • Off: Power has been removed from the device.
HDA-4100 Owner’s Manual Total Control 3. Ethernet LED: Indicates one (1) of the following: 4. Reset Button: There are two (2) ways to press this button: • Solid Blue: The device has received an IP address from the local network. • Single Press: Tap the Reset button to power cycle the device. • Blinking Blue: The device is connected to the local network; however, it has not received an IP address. • Factory Reset: Press-n-hold the Reset button for 10 seconds or more.
HDA-4100 Owner’s Manual Total Control Rear Panel Description Below are the available connections on the rear of the HDA-4100: 1. LAN: Full duplex gigabit LAN (only), for audio streaming and zone control (Wi-Fi NOT available, device must be hard-lined to the network. 4. Zone Speaker Outputs: Supports up to four (4) stereo (L + R) zones, eight (8) mono zones, or any combination of stereo/mono zones (phoenix connector). 2.
HDA-4100 Owner’s Manual Total Control Installation Instructions The HDA-4100 Multi-Zone Amplifier comes with rack-mounting ears and can be installed in a 2U rack space. Installing the HDA-4100 in a Rack: 1. Using a cross-head screw driver, remove the HDA-4100’s feet from the bottom of the device. 2. Attach the rack ears to the left and right sides of the amplifier using the supplied screws.
HDA-4100 Owner’s Manual Total Control Connecting Speakers The HDA-4100 Multi-Zone Amplifier can power up to four (4) stereo zones, eight (8) mono zones or any combination of stereo/mono. To connect speaker wire: 1. Connect the speaker wire to the positive (red) and negative (black) to the wire terminals available on the speaker (be mindful of proper polarity). Please refer to the manufacture’s owner’s manual for specific instructions on wiring the speaker. 2.
HDA-4100 Owner’s Manual Total Control Network Setup When using more than one (1) HDA devices, URC’s HDA-SW5 Network Switch is REQUIRED on the local network. For more information of the HDA-SW5 Network Switch, please refer to the HDA-SW5 Owner’s Manual. Although 3rd Party AVB switches may be utilized, they are not supported by URC’s Technical Support team. Local Router HDA-SW5 Network Switch Connecting the HDA-4100 to the Network: 1 1.
HDA-4100 Owner’s Manual Total Control Room / Zone Status HDA Modules URC’s HDA line of products contains several two-way modules that are accessible from any graphical user interface. Amplifier Status These modules serve a variety of residential and commercial applications providing end-users with advanced functionality directly from any URC interface. For specific instructions on how to use these HDA modules, please refer to the HDA User’s Guide.
HDA-4100 Owner’s Manual Total Control Specifications General: Audio Inputs: • Four (4) RCA analog (unbalanced) inputs with audio sensing capabilities Height x Width x Depth: • 3.5” (without feet) x 17.
HDA-4100 Owner’s Manual Total Control Audio: • Frequency Response: ±0.
HDA-4100 Owner’s Manual CA U T I O N Risk of electric shock do not open caution SAFETY PRECAUTIONS Total Control To reduce the risk of electrical shock, do not remove cover (or back). No user-serviceable parts inside. Refer service to a qualified service professional CA U T I O N To prevent electrical shock, match wide blade of plug to wide slot, fully inset. This device complies with Part 15 of the FCC Rules.
HDA-4100 Owner’s Manual Total Control Important Safety Instructions • Read Instructions: All the safety and operating instructions should be read before the apparatus is operated. • • Retain Instructions: Safety and operating instructions should be retained for future reference. • READ all warnings! • Use ONLY with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
HDA-4100 Owner’s Manual Total Control Federal Communications Commission Interference Statement FCC Caution This device complies with Part 15 of the FCC Rules. Operation is subject to the following This equipment has been tested and found to comply with the limits for a Class B digital two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired device, pursuant to part 15 of the FCC Rules.
HDA-4100 Owner’s Manual Total Control Limited Warranty Statement 1. Limited Warranty and Disclaimers Universal Remote Control, Inc.
HDA-4100 Owner’s Manual Total Control in whole or in part, where such are restricted or excluded by applicable law, and such shall apply to the maximum extent permitted by applicable law. has been altered or removed from the URC equipment. This limited warranty specifically excludes the URC equipment sold by unauthorized resellers.
HDA-4100 Owner’s Manual Total Control PERMITTED BY APPLICABLE LAW. URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADE BY OTHERS. End User Agreement The terms and conditions of the End User Agreement are available at: https://www.urc-automation.
