Owner's Manual

Total Control

HDA-4100

Owner’s Manual

Front Panel Descriptions

There are three (3) LEDs on the front panel of the HDA-4100:

1. Power LED: Indicates one (1) of the following:

• Solid Blue: Power has been applied to the device and it has

successfully initialized.

• Off: Power has been removed from the device.

2. Status LED: Indicates one (1) of the following:

• Solid Blue: The device has been programmed with Total Control software

and is ready for operation.

• Blinking Blue: The device is receiving a download from the Total Control

programming software.

• Blinking Green: The device is receiving a rmware upgrade, this light

continues to blink until the update is fully applied.

• Off: The device has not been programmed with Total Control software.