Owner's Manual

Total Control

HDA-4100

Owner’s Manual

3. Ethernet LED: Indicates one (1) of the following:

• Solid Blue: The device has received an IP address from the local network.

• Blinking Blue: The device is connected to the local network; however, it

has not received an IP address.

• Off: The device is not connected to the local network.

4. Reset Button: There are two (2) ways to press this button:

• Single Press: Tap the Reset button to power cycle the device.

• Factory Reset: Press-n-hold the Reset button for 10 seconds or more.

This option cannot be reversed, once the device has been factory defaulted

it requires re-programming.