Owner’s Manual MRX-4SEN Sensor Extender
MRX-4SEN Sensor Extender Owners Manual ©2014 Universal Remote Control, Inc. The information in this Owner’s Manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this Owner’s Manual may be subject to change without prior notice.
TABLE OF CONTENTS Introduction 1 Features and Benefits 1 Parts Guide 1 Front, Rear, and Bottom Panel Descriptions 2 Network Installation 5 Specifications 6 USA Limited Warranty Statement 7 End User Agreement 9 Federal Communication Commission Interference Statement 10 Declaration of Conformity 11
MRX-4SEN SENSOR EXTENDER Introduction Thank you for purchasing the MRX-4SEN Sensor Extender. Expand your MRX Advanced Network System Controller sensor coverage beyond four ports by adding additional MRX-4SEN units throughout the home or office. Features and Benefits • Expand Sensor Coverage Add one or more MRX-4SEN throughout your home or office to detect changes in a connected sensor, which may be used to trigger system events.
MRX-4SEN SENSOR EXTENDER Front, Rear, and Bottom Panel Descriptions Front Panel The front panel consists of three indicator lights: Power LED: The Power LED illuminates when the unit is powered. Status LED: The Status LED color will vary depending upon its connected state: ● Connected: Illuminates green ● Low Signal: Illuminates orange ● Not Connected: Not illuminated Data LED: The Data LED flashes as the MRX-4SEN transmits data to a MRX Advanced Network System Controller.
MRX-4SEN SENSOR EXTENDER Rear Panel The rear panel consists of: DC 12V Power: Plug in the included 12V DC 1A power supply. Sensor Inputs: Connect the sensor’s 3.5mm plug to an available port.
MRX-4SEN SENSOR EXTENDER Bottom Panel The bottom panel consists of: ZIGBEE Address Sticker: The ZIGBEE Address (16 characters) identifies this wireless device when connected to the network. Serial Number Sticker: The serial number, located at the bottom of the unit, uniquely identifies the product. Test button: Press to refresh the signal and test the signal strength between the MRX Advanced Network System Controller and the MRX4SEN.
MRX-4SEN SENSOR EXTENDER Network Installation WARNING!! Before proceeding, a Custom Professional is required to install and configure your MRX-4SEN. Connect the 3.5mm sensor plug to the rear of the MRX-4SEN. When a change in the sensor’s state is detected, the MRX-4SEN sends a signal to the MRX Advanced Network System Controller and triggers a series of commands. The example below showcases a voltage sensor connected to the home’s doorbell and the MRX-4SEN.
MRX-4SEN SENSOR EXTENDER Specifications Sensor : Four sensor ports support Video, Current, Contact Closure, Ambient Light, Audio, and Voltage sensors from URC. USB : Mini USB for future firmware upgrade use. RF Range(radio frequency) : 50 to 100 feet, depending upon the environment RF Frequency : 2.405 ~ 2.480 GHz Weight : 2.98oz Size : 3.74” X 2.7” X 1.
MRX-4SEN SENSOR EXTENDER Limited Warranty Statement 1. Limited Warranty and Disclaimers Universal Remote Control, Inc. (“URC”) warrants that the URC equipment shall be free from defects in material and workmanship under normal usage for two (2) years from purchase when such is purchased from URC. This limited warranty is valid only in the United States of America. URC warrants that the software will substantially conform in any material respect to its functional specifications at the time of delivery.
MRX-4SEN SENSOR EXTENDER LIMITING THE GENERALITY OF THE OTHER PROVISIONS HEREIN, WARRANTY DOES NOT COVER: (I) DAMAGE FROM MISUSE, NEGLECT OR ACTS OF NATURE, (II) MODIFICATIONS, (III) INTEGRATION WITH THIRD PARTY CONTENT (IV) BEYOND THE WARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC WARRANTY CLAIM PROCEDURE.
MRX-4SEN SENSOR EXTENDER programmable remotes or any of our Total Control® whole-house equipment online means buying equipment that does not have a URC’s limited warranty. Such equipment is not eligible for URC tech support or software support, either. 2.
MRX-4SEN SENSOR EXTENDER Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
MRX-4SEN SENSOR EXTENDER Declaration of Conformity Company Name : OH SUNG ELECTRONICS CO., LTD.
NOTE Page 12
NOTE Page 13
NOTE Page 14
NOTE Page 15
NOTE Page 16
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.
