Instructions / Assembly
When mitering corners instead of using the URESTONE existing keyed and
keyless corners, it is important to glue the miter with PL Polyurethane adhe-
sive or DEMONIC 100 caulk/adhesive.
3.4 Gluing Mitered Joints
4.0 Caulking Methods and Blend
When caulking aer the panels have been
installed, it is important to inject the caulk
as deep as possible into the gaps. If the
caulk is just applied at minimum depth or
just on the surface then will not provide
enough protection with expansion and
contraction. e proper
caulking method is to apply or inject the
caulk as deep into the gaps so that it has the
ability stretch with the expansion and contraction. However,
in order for the caulked seams to blend in properly it is im-
portant not to add too much caulk that draws attention to the
joints.
Aer adding the caulk, See section 5.0 about blending the
caulk into joints then see section
3.0 SCREW RECOMMENDATIONS