Installation Manual

DS1083-127

4. TECHNICAL

SPECIFICATIONS

Multi-user call sender device

External input voltage: .............................. 24 V

Maximum absorption: .............................. 200 mA

Absorbed power in operation: ................ max 6 W

Operating temperature: ........................ -5 ÷ +45 °C

23 ÷ +113 °F

Max humidity: ............................................ 95% RH

Ethernet interface: ............................. 10/100 Mbps

Wi-Fi: .. 2.4 Ghz (conforms to IEEE 802.11 b/g/n)

with internal antenna

Dimensions (LxHxD):

140 (~8 DIN modules) x 90 x 60 mm

5.51 x 3.54 x 2.36''

The product is designed to be

Ref. 1083/24 supplied, by means

of 24 V terminals (6 W, 24 V). The

power output complies with limited

power source (LPS) speciﬁ cations

and is protected against short-

circuit and overcurrent according to

EN 60950-1:2006+A11+A1+A12+A2.

Power supply (provided)

Power supply: .................... 100-240 Vac 50/60 Hz

Power: .................................................. 12 W max

Secondary output: ........................ 24 V 0,42A

Power dissipated after after 1 hour of functioning:

max 11 Wh (~40 KJ)

Dimensions (WxHxD):

36 (2 DIN modules) x 98 x 60 mm

Wires with cross-section area of 0.5

or larger must comply with IEC

60332-1-2; wires with cross section

area smaller than 0.5 mm

must comply

with IEC 60332-2-2.

5. CONFIGURE THE DEVICE

To conﬁ gure and use the device, scan the QR-

Code with the camera of your smartphone or tablet

to download the Conﬁ guration manual of the

CallMe app:

http://qrcode.urmet.com/default.aspx?prodUrmet

=150309&lingua=en