Installation Instructions
3
A
1
B
+
+
+
C
A1
B
C
A2
B
C
3
< 1 s
Or
< 1 s
+
5 s
Multiple pairing: You can control several switches with the same wireless, batteryless switch by repeating the
operation for each product that you want to control.
A1
B
C
A2
Tap 3 times the product to be controlled with the wireless, batteryless control. The light of the product to control flashes
rapidly.
For the specific case of the latching relay, press the main button of the latching relay until the configuration indicator
flashes slowly in blue, release it then tap the wired product you want to control 3 times with the wireless, batteryless
control. The indicator light of the product to be controlled flashes rapidly.
While holding the "setup" button on the wireless, batteryless control, briefly press the "ON" or "OFF" button of the chosen
side (1 or 2).
The indicator light of the product to control will briefly turn blue, and then will turn green again.The pairing was successful.
Check the correct pairing by pressing ON/OFF buttons
Complete the installation
If necessary, erase the conguration of the wireless,
batteryless control (factory reset)
To complete your installation, briey press the congu-
ration of the Module Control or the middle of the wire-
less Home / Away master switch.
All the indicator lights on the products switch o
While holding the "setup" button on the wireless, batteryless
control, press the upper button for 5 seconds.
Conrm that your control is correctly reset by making an
ON command, then OFF