Operation Guide

Performance parameters
Instructions for Buzz and Vibration
Buzzer, vibration status Description
Start-up sound + no vibration Device successful startup
One long buzz + vibration Successful shutdown
One short buzz + vibration Successful decoding
Two short buzz + no vibration The battery is set successfully, the Bluetooth is
connected successfully, and the Bluetooth is
disconnected
One long buzz + no vibration Setup failure
I
mage sensor 1280 (horizontal) × 800 (vertical) CMOS, 60fps
Viewing angle 41°(H)×26°(V)
Reading angle rotation 360°, tilt ±60°, deflection ±60°
Reading depth of
field
Code39: 60~200mm (5mil) Code39: 80~550mm (20mil)
UPC-A: 50~400mm (13mil) PDF417: 50~300mm (6.7mil)
DM: 80~200mm (10mil) QRCode: 60~400mm (20mil)
Decoding tips
Input voltage and
current
Buzzer, LED tri-color light, vibration motor
USB 5V @500mA (max)
Communication
interface
Pogo pin contact
Memory capacity 64MB
External dimension 62.9mm*33mm*18.7mm (length×width×height)
Weight 72 g (excluding direct charger)
Environmental
parameters
Working temperature: 0℃~50℃
Storage temperature: -30℃~60℃
Working humidity: 5%RH~95%RH (non-condensing)
Drop height: 1.5 meters
Supported code
system
Linear: UPC/EAN/JAN, GS1 DataBar, Code 39, Code 128, Code 32, Code93,
Codabar/NW7, Interleaved 2 of 5, Code 2 of 5, Matrix 2 of 5, MSI, Telepen,
Trioptic, China Post
2D Stacked: PDF417, MicroPDF417, GS1 Composite
2D Matrix: Aztec Code, Data Matrix, QR Code, Micro QR Code, MaxiCode, Han
Xin
Postal: Intelligent Mail Barcode, Postal-4i, Australian Post, British Post,Canadian
Post, Japanese Post, Netherlands (KIX) Post, Postnet, Planet Code
OCR Option: OCR-A, OCR-B, E13B (MICR)
Precautions
1. Read all information in this guide before using the device to
ensure safe and proper operation.
2. Please use the accessories that have been approved by this
manufacturer and corresponds to this model. Use of any power
source, charger, battery, etc. that has not been approved by this
manufacturer may cause a fire, explosion, or other hazards.
3. Please use device and accessories within the specified
temperature range. Equipment failure may occur when the
ambient temperature is too high or too low.
4. Do not disassemble the product and its accessories. If the
equipment or any of i
ts components are not working properly,
consult the after-sales service of the company promptly, or send
the equipment to the after-sales service outlet for testing and
maintenance.
5. The battery is made from a flammable and explosive material.
Do not disassemble, squeeze, drop and make any other
destructive operations on the battery. Do not place the battery in
high temperatures.
6. Disposal of used batteries is subject to local relevant
documents or policies regarding disposal of used batteries.
Warranty Policy
Thank you for using intelligent terminal series products. In the situation
of quality problems, which arise from raw materials or production
processes, during normal use of purchased products, the seller will be
responsible for free maintenance within one year from the date of
purchase.
The company may provide repairs due to the user's failure to use the
product according to the provided instructions of the product. However,
corresponding service fee and component fee will be charged.
Warranty regulations:
1. Under normal circumstances, the warranty period of the device is 12
months (3 months for accessories), subject to the sales agreement.
2. During the product warranty period, under the normal use conditions
(determined by our technical staff), the user will be entitled to a free
warranty for damaged or faulty warranty parts.
3. During the warranty period, faults caused by repair, disassembly or
modification of the product by a personnel other than our company,
improper installation, improper use by the user (failure to follow
instructions), serial number damage, accident or natural disaster, will
not be covered under the warranty.
4. The warranty will expire immediately if any alterations are made to
the warranty card.
5. Please show the equipment SN and purchase certificate for repair.
The company reserves the right to interpret the above contents.
Note: The contents of the manual are subject to change without prior notice.
This logo refers to the period ( 10 years ) during which the toxic or
hazardous substances or elements contained in electronic information
products will not leak or mutate so that the use of these [substances
or elements] will not result in any severe environmental pollution, any
bodily injury or damage to any assets.
：This symbol indicates that the content of this toxic or hazardous
substance in all homogeneous material is under the limit specified in the
SJ/T11363-2006
X ：This symbol indicates that the content of this toxic or hazardous
substance in at least one homogeneous material exceeds the limit
specifed in the SJ/T11363-2006; however, the exceeding toxic or
hazardous substance in the part with a "x" cannot be solved for there
is no mature technology can be used.
Battery Information
Caution:
1. Risk of explosion if battery is replaced by an incorrect type. Dispose
of batteries according to instructions.
2. However, there are limitations as to how long a battery can operate or
be stored before needing replacement. Many factors affect the actual life
cycle of a battery pack such as heat, cold,harsh environmental conditions,
and severe drops.
3. When batteries are stored over six months, some irreversible
deterioration in overall battery quality may occur. Store batteries at half of
full charge in a dry, cool place, removed from the equipment to prevent loss
of capacity, rusting of metallic parts, and electrolyte leakage. When storing
batteries for one year or longer, the charge level should be verified at least
once a year and charged to half of full charge.
4. Replace the battery when a significant loss of run time is detected.
Battery Safety Guidelines
1.The area in which the units are charged should be clear of debris and
combustible material or chemicals. Particular care should be taken where
the device is charged in non-commercial environment.
2. Follow battery usage, storage, and charging guidelines found in the
user’s guide.
3. Improper battery use may result in a fire, explosion, or other hazard.
4. To charge the mobile device battery, the battery and charger
temperatures must be between 0℃ and +40℃.
5. Do not use incompatible batteries and chargers. Use of an incompatible
battery or charger may present a risk of fire, explosion, leakage, or other
hazard.
6. For devices that utilize a USB port as a charging source, the devise
shall only be connected to products that bear the USB-IF logo or have
completed the USB-IF compliance program.
7. Do not disassemble or open, crush, bend or deform, puncture, or shred.
8. Severe impact from dropping any battery-operated device on a hard
surface could cause the battery to overheat.
9. Do not short circuit a battery or allow metallic or conductive objects to
contact the battery terminals.
10. Do not modify or remanufacture, attempt to insert foreign objects into
the battery, immerse or expose to water or other liquids, or expose to fire,
explosion, or other hazard.
11. Do not leave or store the equipment in or near areas that might get
very hot, such as in a parked vehicle or near a radiator or other heat
source. Do not place battery into a microwave oven or dryer.
12. Battery usage by children should be supervised.
13. Please follow local regulations to promptly dispose of used
re-chargeable batteries.
14. Do not dispose of batteries in fire.
15. Seek medical advice immediately if a battery has been swallowed.
16. In the event of a battery leak, do not allow the liquid to come in
contact with the skin or eyes. If contact has been made, wash the
affected area with large amounts of water and seek medical advice.
Place of Origin:
Shenzhen
Quality Inspector:
02
UROVO TECHNOLOGY LTD.
Website: en.urovo.com
Table of Toxic and Hazardous Substances
and Content in this product
Part
Host
adapter
USB cable
Toxic and hazardous substances or elements
（Pb） （Hg） （Cd）
（PBB）
（Cr(VI)）
（PBDE）
X
X
X