Manual

After weighing an item, if the display does not read “0.0” press the TARE button to
return to “0.0” and you are ready to weigh again.
CHANGE WEIGHING MODES
Press the “CAL/MODE” button to change weighing modes on your scale. This scale has
4 weighing modes: g, oz, gn, dwt.
CALIBRATION
With the scale turned on and placed on a stable surface, press “CAL/MODE” key, till the
display shows 100.0. Place a 100g standard weight onto the middle of the weighing
platform. Calibration succeeds, and the scale is ready for normal use now.
OPERATING ENVIRONMENT
The optimum operating temperature for the scale is 50-86° F/10-30°C. Rough handling of
the scale will damage the internal sensor; so you must avoid actions such as shaking or
dropping the scale. This is a sensitive piece of electronic equipment and will be affected
by things such as moisture, extreme temperature changes, magnetic fields, careless
handling and misuse.
AUTOMATIC SHUT-OFF
The scale will automatically shut-off after 60 seconds of inactivity this is to help conserve
the battery power. We recommend good quality AG10 batteries.
Tested to comply with FCC standards.