Repair manual

Keeping You On the Road 45
Bubble Balancer
Ruggeddie-castaluminumheadcone;plated
steelguiderodswithzincchromatehelpersprings;
hardenedcast-in-placepivotseat;recessedcircular
levelbubble.Shaftismadefromtough6061extruded
aluminumASTMB221;hardenedpivotpinforlong
wear;heavydutycastaluminumbase.
Part
Number
Description
14-961 Bubble Balancer
14-962 Circular Level (Bubble) for 14-961
14-963 Pivot Pin for 14-961
14-964 Shaft (Includes 2 Nuts and 2 Washers) for 14-961
14-965 3/4 and 1 Ton Adapter for 14-961
Part
Number
Description
Type of
Bead
Case
Qty
16-301 1 oz. Passenger (Contains: 4 – 1 oz. Bags) Steel 40
16-302 2 oz. Passenger (Contains: 4 – 2 oz. Bags) Steel 32
16-303 3 oz. Passenger (Contains: 4 – 3 oz. Bags) Steel 24
16-304 4 oz. Heavy Truck Glass 92
16-305 5 oz. Heavy Truck Glass 76
16-306 6 oz. Heavy Truck Glass 64
16-308 8 oz. Heavy Truck Glass 52
16-310 10 oz. Heavy Truck Glass 40
16-312 12 oz. Heavy Truck Glass 36
16-314 14 oz. Heavy Truck Glass 32
16-316 16 oz. Heavy Truck Glass 28
Hub hole diameter 1.5" - 4.5" (39 - 114.3mm)
Bubble sensitivity .788 sec. per 2mm
Overall height 22" (559mm)
Overall width 12" (305mm)
Overall weight 14 lbs. (6.35 kg)
Boxed dimensions 11.75" x 18" x 6.75"
(298mm x 457mm x 171mm)
Calibrated at 90˚, 180˚, 270˚, and 360˚
Counteract Balancing Beads
Counteract is an internal balancing compound used to balance the
entire wheel assembly. Counteract balances for the complete life of the
tirebyreadjustingthebalancedpositionasrequired.Benetsofkeeping
the entire wheel assembly in balance
include increased tread life,
increased fuel economy,
and eliminates
wheel vibration.
Easy to Use,
Bag-in-bag Packaging
Simply open the outer bag,
remove the inner bag and throw
the inner bag inside the tire before
inflating. This method allows the use
of an air blaster and will not contaminate
the bead seating area.
Contains no powders
Will not clump due to moisture
Will not interfere with tire repair
(remove before beginning repair)
Use with tubeless or tube-type tires
Part
Number
Description
Wheel Balancer Cones and Spacers
14-94705-28 28mm Cone; 1.75" - 2.58" Range
14-94710-28 28mm Cone; 2.25" - 2.62" Range
14-94715-28 28mm Cone; 2.44" - 3.06" Range
14-94725-40 40mm Cone; 3.375" - 5.25" Range
14-94730-40 40mm Cone; 3.375" - 5.88" Range
14-94735-40 40mm Cone; 5.03" - 6.88" Range
14-94750-40 40mm Wheel Balancer Spacer/Backing Plate
Wheel Balancer Accessories
14-936 Manual Hub Nut for
Coats Wheel Balancers for
Coarse Thread Shaft 28.5mm
14-939 Rim Width Caliper
28mm Cones and Spacers Fit
Accuturn 5223, 5500, 5100 & 5600
(Serial 51-0001 to 51-0622)
Coats All Models (Excluding 6401)
Mondolfo Ferro All Models
(Excluding Truck Balancers)
Norton All Models
Snap-On All Models
Sun 1742, 1762
40mm Cones and Spacers Fit
Accuturn 1200, 1250, 1400, 1500, 1550,
1650, 1850, 5100 & 5600
(Serial 51-0623 to 51-1457)
Bear 80-100, 80-303
Beissbarth All Models
CEMB Truck Balancers Since
June 2000
Coats With Optional 40mm Shaft
ALL Models On FMC, Hofmann, Hunter, John
Bean, Kwik-Way, Performance,
Phoenix CB-113
14-936
14-939
14-94705-28
14-94750-40
14-961