User`s manual

User's Manual Optional Devices 8-13
Version
1
Last Saved on 27/01/00 18:20
Satellite Pro 4200/4300 User's Manual – 4200_UK.doc – ENGLISH – Printed on 27/01/00 as
IM_420UK
Connecting to the Card Station IV
The Card Station IV is designed to assure a secure connection by a few
simple operations.
Before connecting, make sure the engaging pins are down.
Before connecting, remove the rubber cover from the computer’s Docking
Interface cover.
When a Card Station IV is connected to the computer, you will not be able
to use the ports along the back of the computer or the USB ports.
To connect the Card Station IV, follow the steps below.
1.
Remove the rubber cover from the Docking Interface port.
2.
Make sure the engaging pins on the Card Station IV are down.
3.
Seat the computer between the Card Station IV’s guide rails.
4.
Grasp the finger grips on either side of the Card Station IV and slowly
push the computer toward the connector.
Connecting to the Card Station IV
5.
Press firmly to assure a secure connection.
6.
Slide the computer lock forward to prevent inadvertent release of the
computer from the Card Station IV.
The computer lock is integrated with the PC Card lock on the computer.
When it is in the lock position, you will not be able to remove or install a
PC Card.