User`s manual

6-10 Power and Power-Up Modes User's Manual
Satellite Pro 4200/4300 User's Manual – 4200_UK.doc – ENGLISH – Printed on 27/01/00 as
IM_420UK
Installing the battery pack
To install a battery pack, follow the steps below.
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
Toshiba as replacements.
1.
Turn the computer’s power off.
2.
Disconnect all cables connected to the computer.
3.
Hold the battery pack so that the label faces down and the connectors
on the battery face the connectors on the computer.
4.
Lay the battery pack in the cover and make sure it is secured by
the latches.
Inserting the battery pack
5.
Make sure the battery latch is set to the open position, then align the
back edge of the cover with the icon and gently press down and back.