Owner`s manual

BASIC OPERATION

RADIO OPERATION

BAND [BAND BUTTON](18)

In RADIO mode, press the BAND button on the front panel or on the remote

controller to select your desired radio band and word which band is selected

will be displayed on LCD. Press it to change the bands as below :

FM MW LW

For 3 Bands (Europe)

FM MW

For 2 Bands (Europe)

FM AM

For 2 Bands (USA)

PRESET STATION (6-11)

A)To memorize the current frequency, press any one of the six preset buttons[1-6]

on the front panel or on the remote controller hold for more than 2 seconds.

B). To recall the preset memory, press one of the preset buttons [1-6].

AS/PS BUTTON (12)

When shortly pressing the APS button on the front panel or the A/P button on the

remote controller, the radio searches for each preset station. When the field

strength level is more than the threshold level of stop level, the radio is holding at

that preset number for few seconds with releasing mute, and then searches again.

In FM band, FM 1,FM 2 and FM 3 is checked one at a time When long pressing the

APS or A/P button (more than 1 second), the radio searches from the current

frequency and checks the signal strength level until 1 cycle search is finished.

And then 6 strongest stations are preset to the corresponding preset number.

The AS operation is implemented in the each band of selected band. When the

AS operation is finished, the radio executes the preset scan.

STEREO/MONO

Press the ST/MO button on the remote controller to select STEREO or MONO sound mode.

TUNE/SEEK UP/DOWN

Press UP or DN button on the remote controller or T-UP/T-DN on the front panel to

manually tune up or down for your desired station. Press them hold for more

than 2 seconds to automatically tune up or down for the stronger station.

LOC(LO/DX)

Press LO/DX button on the remote controller for distance reception when you are

located at weak signal location

Depress it for stronger signal.