Operation Manual

GN B

Y U

.S B

ASTER - P.O. Box 5376 - Carefree - AZ 85377 - USA.

USB 7013 - 7014

Console mixers

ONO INPUT CHANNELS

9. AUX

Used for monitoring the stage or playback room's return.

10. EFFECT

ets the signal sent to inside or outside effectors.

11.FX

Can let the signal sent to inside or outside effectors. Can also be used for

monitoring the stage or the return of recording.

12. SOLO

The FADER allows balancing of the various source signals being mixed to

the Master section.You get most control when the input sensitivity is set up

correctly; giving full travel on the fader, see the 'Setting Up &

roubleshooting' for help in setting a suitable signal level.

13. MUTE

All outputs from the channel except inserts are active when the MUTE

switch is released and muted when the switch is down, allowing levels to

be pre-set before the signal is required.

14. PEAK

This is the LED which indicates the input signal level of this appliance

(regardless of output) when GAIN volume is adjusted.

15. FADER

The FADER allows balancing of the various source signals being mixed to

the Master section. You get most control when the input Sensitivity is set

up correctly, giving full travel on the fader. See the 'Setting up &

roubleshooting' section for help in setting a suitable signal lev

el.