Operation Manual

GN B

Y U

.S B

ASTER - P.O. Box 5376 - Carefree - AZ 85377 - USA.

USB 7015

Console mixer

NPUT CHANNEL SECTION

1. BALANCE INPUT

Electronially Balanced inputs acceptable a standard XLR male connector.

48V Phantom Power available on each input Mic socket. And this switch is

on Rear Phantom Power.

2. LINE INPUT

The unbalanced Mic input is provided for the use of a unbalanced mic and

is designed to accept a unbalanced high impedance input signal. (This use

for connection Deck,Turntable,Keyboard etc,.)

3. GAIN CONTROL

Adjusts input sensitivity from -60dB to -20dB with the -20dB pad switch in

the out position, and -40dB to OdB when the -20dB pad switch is pushed.

4. HIGH

Control the high frequency tone of each channel. Always set this control to

the 12 O'clock position. You can control the high frequency tone according

to the speaker, the conditions of listening position and listener's taste,

Clockwise rotation of the control increases level.

5. MID

This has a function which controls the middle frequency tone of each chan-

nel. Always set this control to the 12 o'clock position. You can control the

middle frequency tone according to the speaker, the conditions of listening

position and listener's taste. Clockwise rotation of the control incrases the

level, and vice versa.

6. LOW

Controls the low frequency tone of each channel. Always set this control to

the 12 o'clock position. You can control the middle frequency tone accor-

ding to the speaker, the conditions of listening position and listerner's state.

Clockwise rotation of the control increases the level.

7. SEND

Use this contol to set the level of signal from external stereo souce and the

main signal control is recontrolled by the STEREO or MONO section.

8.EFF

Use this control when you want to get sound effects by adjustment of the

input signal. when you don't use external sound, digital delay will be wor-

king which is installed inside.