Operation Manual

USB 7015

Console mixer

OPERATION

1. It is important to confirm power voltage.

2. Make sure the appliance is switched off before connecting the power cord.

3. Set the controls to the positions stated below to avoid loud blasts. Loud blasts may couse damage to

your speaker system or your ears when you are wearing a headphone.

Master faders L-R, Sub faders 1-2, Effect fader & Each channel faders.

Gain control Turn to the left completely

Hi,freq,Mid,Low Turn to the center position

Auxl-2 & Effect control Turn to the left completely

Pan control Turn to the left completely

Set other turn to the left completely

4. Push power switch, the LED will light up.

5. Set Master faders L-R to the position between min & mid.

6.Set the channel faders which you want to use at the position between min & mid. After that, connect

input section with external source.

7. To use external sources, turn the gain control to the right.

GN B

Y U

.S B

ASTER - P.O. Box 5376 - Carefree - AZ 85377 - USA.