Operation Manual

2
4. Forward/Reverse
Control the direction of the Platter
5. TIME / STOP BUTTON
This button switches the time display between total remaining time, remaining time of the current song, elapsed playing time. The unit will be in the
“stop” mode if you continue pressing the button for 3 seconds.
6. 3 HOT-CUE
This unit will allow you to play from 3 cue points instantly.
a.Set CUE memory: Press the MEMO button first, and then press the CUE button to complete the CUE setting, then this CUE button will light up.
b.Play” CUE” memory: Upon pressing specific CUE button, it will flash about 5 seconds.
Note: This function is not available during perform REVERSE sound effect.
7. Motor ON/OFF
Switch of the Platter Motor
8. BOP BUTTON
The playback will automatically play from the CUE point upon the button is pressed.
9. CONTINUE/SINGLE Button
To press this button it can switch between auto cue single and continue. The selected mode is indicated on the display.
*AUTO CUE SINGLE - After each track, the unit pauses at the beginning of next track. The playback starts from audible point.
*CONTINUE -To play all tracks continually.
*OUTRO - The unit will play the last 30 seconds of each track. Press the button for 3 seconds to switch OUTRO function.
10. CUE BUTTON
The cue function allows the CD returning to the memorized point. In PAUSE mode, pressing the CUE button to set the cue point, and the CUE button
blinks; in PLAY mode, press this button to pause the unit at the memorized point.
11. PLAY/ PAUSE BUTTON
Each press of this button causes the operation to change between PLAY and PAUSE modes.
12. TRACK/FX PARAMETER KNOB
The Knob select the track to be played and FX Parameter adjust
13. SEARCH BUTTON
Pressed the button to switch the function of Jog Dial between SEARCH and PITCH BEND.
 When the indicator LED is light, dial the jog for quick search forward and backward.
 When the indicator LED is off, dial the jog for pitch bend function.
 If the jog is unmoved for 8 seconds, the indicator light will go off.
14. PROGRAM BUTTON
You can program the track you want. While the unit is stopped, press the PROG button first to enter memorized mode, by pressing the skip buttons
to select the tracks you want to order and then press the PROG button again to compete set up per track. The max tracks you can program are 16
tracks per disc. While playing programmed tracks, the LED of PROG lights up. While the unit is stopped, open the tray disc or turn off the power,
the program will be exit.
This button can be used for DISC IDENTIFICATION, please note the point 22
15. PITCH BEND + / - BUTTON
When each of the two CD players is playing, the pitch bend function allows the position of the bass beat to be matched after the pitch has been adjusted. The
pitch will automatically rise up to + 16% from the current setting while pressing the “ + “button. While pressing the “ – “ button, the pitch will automatically drop
to - 16 % from current setting. By the way of changing the pitch the position of the beats can be matched
16. PITCH CONTROL SLIDER
To match the choices of playback speed (8%, 16%, 50%), you can choose what range you want between minimum (up side) and maximum (bottom
side) by moving the pitch control slider.
.
17. KEY ON/OFF SWITCH
Press the button to switch KEY mode on or off.
 KEY OFF: The display shows the “KEY” in blinking, and the key changed according to the pitch change. The key parameter adjustment is not in
effect
KEY ON: The “KEY” lights on the display, turning the SCOPE knob to adjust the key. Slide the pitch slider will also change the key.
18. PITCH ON/OFF BUTTON
Press the button to be PITCH ON mode, press it again on the PITCH ON mode, and blinks with unit on the PITCH OFF mode.
19. PITCH % SELECT BUTTON
Select the pitch change range from ±8%, ±16%, ±50%. The playback speed will change when you move the pitch control slider.
20. TONE ARM SECTION
Type: Universal S-Shape tubular arm