Operation Manual

4
LCM INSTRUCTION
This unit can display text information on the display when playing CD text
discs which contain text information in English category.
The CD text disc includes the mark shown at the right.
Note:
This unit can provide a text display of the following types of characters.
Other types of characters will result in “” being displayed.
Alphabet
Numbers
Symbols
1. TOTAL TRACK – the track numbers of the CD or CARD.
2. / – The unit is in playing/ paused.
3. CONT / SINGLE – Shows when the unit is set to play the all
tracks continually or play only one track.
4. MP3 – Lights up when the unit is playing MP3 file.
depending on mode setting
5. TIME MODE (ELAPSED, TOTAL, and REMAIN) –
Shows the time as it is taking place, how much time is left on full CD
or on a particular track.
6. LOOP – lights up when loop effects are active.
7. TIME BAR – Show the time length depending on the setting of
the “TIME” mode.
8. TRACK – Shows the track number that is playing.
9. MINUTES – Shows the minutes elapsed or remaining.
10. SECONDS – Shows the seconds elapsed or remaining
depending on mode setting.
11. FRAMES – The CD Player breaks down a second into 75
frames for accurate cueing. This shows the frames elapsed or
remaining depending on mode setting.
12. PITCH – The pitch change range
13. BPM: Manual BPM mode
: Auto BPM Mode
14. Number of Beat per minute
15. ID3 tag of CD/MP3 : Press “Search” button (above Dial
Wheel) button for 2 seconds to display the ID3 data, file name°B
Folder name°B Artist name°B Title name and Album name, press
this button again to confirm it.
16. PGM-Shows when you program the track you want