Operation Manual

5
DESCRIPTION OF THE FUNCTIONS
Rear View
1. PHONO OUT (RCA Jacks)
The audio from Turntable is output from these jacks. Connect to the PHONO input of the mixer.
1. CD OUT (RCA Jacks)
The audio from each CD player is output from these jacks. Connect to the line input of the mixer.
2. DIGITAL OUT
The digital from each CD player is output from these jacks. Connect to the line input of the D/A Amplifier.
3. POWER (Power Switch)
Press the power switch to turn the unit on, and the LED indicator will be light.
To switch the POWER off by pressing the POWER switch again.
4. Relay Connector
This connector is used for connecting to another CD player to allow Relay function to work.
5. Remote
This connector is used for connecting to FADERSTART wire remote control unit.
6. TACT / LOCK / CUE PLAY option
Select the type of switch in the mixer for FADERSTART wire remote control.
7. POWER (Power Switch)
Press the power switch to turn the unit on
8. AC input voltage selector:
Switch between 115V @ 60Hz and 230V @ 50Hz