Operation Manual
6
BASIC OPERATION
There are 3 modes for CDJ800TT (control switch on the FRONT PANEL)
1. CD
2. MIX (CD / TURNTABLE)
3. TT (TURNTABLE)
1. CD
1. Under PAUSE Mode, Press PLAY Button to memorize MAIN CUE
2. Select between 33 / 45 rpm/min
3. FORWARD / REVERSE SWITCH: which control CDDA, PLAY, FORWARD / REVERSE
4. MOTOR ON/OFF:
a. When MOTOR LED ON, turntable turns or stop as you press Play or Pause button.
CD disc will follow the turntable turning speed and affect by the Pitch Control setting
b. When MOTOR LED OFF, turntable will stop and CD disc still affect by Pitch Control setting
5. INSTANT REVERSE:
When Instant Reverse mode ON, the Brake sound cause by motor reverse will not be heard.
6. EFFECT:
a. LED ON to start EFFECT Display show EFFECT Parameter for 5 sec back to the last displayed EFFECT
b. Effect Adjustment: EFFECT KEY HOLD Turn the Encoder anti-clockwise to reduce the EFFECT Gain
Turn the Encoder clockwise to increase the EFFECT Gain, PUSH Encoder to switch to Parameter +10 mode
c. EFFECT Setting will be saved before the machine turn off.
7. Under MP3 MODE, press the ENCODER to select Folder and release to enter
2. MIX
Under MIX mode:
1. MOTOR ON/OFF °B PITCH / PITCH SLIDE °B FORWARD / REVERSE
control the Turntable , and other buttons control the CD player
2. Turntable is not able to control CD player
3. There are 3 speed modes for turntable (33 / 45 / 78) , if switch to 78 rpm/min under CD MODE , Turntable rpm will reduce to 45 rpm/min automatically
(only 33/45 for CD mode)
4. EFFECT operation method remain as same as CD MODE’s.
5. No REVERSE function for CD PLAY.
3. Turntable
1. There are 3 speed modes for turntable (33 / 45 / 78), if switch to 78 rpm/min under CD MODE, Turntable rpm will reduce to 45 rpm/min
automatically (only 33/45 for CD mode)
2. Platter does not turn as in MOTOR OFF. As MOTOR ON, press PLAY/PAUSE to start or pause the Platter.
3. PITCH / PITCH SLIDE which control the Turntable speed.
4. No function for all the other buttons except PLAY / PAUSE button
4. Effect Parameter Setting
Turn the Track knob to adjust the Effect parameter as the Effect On
Flanger:
Sync on:1-4~64-1 (default:4-1)
Sync off: 25~800 (default: 400)
Determine the length of FLANGER effect.
SYNC-OFF, 0.25 sec is the shortest, and 8 sec is longest;
SYNC_ON, 1/4 beat is the shortest and 64/1 beats is the longest.
Echo:
Sync: 1-4~64-1 (default: 1-2)
Sync off: 25~400 (default: 50)
Determine the delay time of ECHO effect. SYNC OFF, 0.01 sec is the shortest, and 4 sec is longest; SYNC_ON, 1 beat is the shortest and 4/1 beat is the
longest.
Filter:
Sync: 1-4~64-1 (default: 8-1)
Sync off: 0~100 (default: 50)
Determine the scanning time of FILTER effect. 1/4 beat is the shortest and 64/1 beats is the longest
When Sync off, select the band of frequency. The number increased, the frequency is close to the treble. T