Operation Manual

USB 7334 - 7335 - 7336
‘Black Sabbath’ CD Players
1. POWER BUTTON
Press the power switch to turn the unit on. To switch the POWER off press the
POWER switch again.
2. JOG & SHUTTLE WHEELS
Shuttle: Use the dial to select the scanning direction and speed. The disc is scanned in forward
direction when the shuttle dial is turned clockwise from the neutral position and in the reverse
direction when the shuttle dial is turned counter-clockwise. The scanning speeds up when the
shuttle dial is tumed faster.
Jog: ln pause mode, if you turn the jog, the point at which the sound is being produced moves by
a number of frames corresponding to the number of clicks. Clockwise moves the point forward,
counterclockwise moves the point backward.
In play mode ,the jog increases or decreases the speed of the song.
(clockwise : increase, counter-clockwise: decrease).
3. TIME BUTTON
Use this button to choose the time mode: Elapsed time, remaining time or total remaining time.
4. REPEAT BUTTON
Use this button to repeat one track or all the tracks of the CD.
5. PGM BUTTON
You can program several tracks (20 tracks max.):
- Press the PGM button to enter the program mode.
- Use the skip track buttons to choose the track you want, then press the PGM button
- Repeat the operation to select all the tracks you want.
- Press the play / pause button to start the playback.
6. IN BUTTON (LOOP SYSTEM)
This button sets the beginning of the loop. The loop indicator flashes on the display.
7. OUT BUTTON (LOOP SYSTEM)
When you press this button, you set the end point of the seamless loop and you start the loop.
To finish the loop, press this button again.
8. RELOOP BUTTON (LOOP SYSTEM)
Use this button to start the last saved loop.
9. SKIP
|<< BUTT
ON
Use this button to re-start the track or to select the previous track.
10. SKIP >>| BUTT
ON
Use this button to select the next track.
11. PLAY/PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from
pause to play.