Operation Manual

USB 7334 - 7335 - 7336
‘Black Sabbath’ CD Players
22. LINE OUT
Connect to the line input of a mixer.
23. POWER SUPPLY SWITCH
Used this selector to choose the correct power supply.
24. AC CORD
25. DIN SOCKET
Connect on all this sockets the mini-din cable provide with the cd player. Connect the player 1
with part 1 of the controller and player 2 with part 2 of the controller.
26. FUSES
Under normal operation the fuses should not blow. A blown fuse usually indicates an overload or
faulty condition. To change the fuse, remove the power cord, pry off the fuse block with a small
flathead screwdriver and change the blown fuse. Refer to the specifications page for fuse current
ratings. If the fuses blow immediately upon power up, this indicates a faulty condition and the CD
player should be returned to your US Blaster dealer for repair.
27. REMOTE SENSOR
This sensor receives the information of the remote control. Don't place any object or sticker in
front of the sensor.
WARRANTY CONDITIONS
US Blaster equipment is covered by a 1-year warranty on parts and labor except for Crossfaders
(90 days).
The following rules apply from the day the equipment leaves the factory:
The date on the invoice is considered to be the date the warranty begins. Only companies appro-
ved by US Blaster are allowed to work on the equipment. Warranty becomes void when other
service technicians open the equipment. During the warranty period, defective equipment must
be sent by pre-paid mail in the original box. US Blaster will return the goods by pre-paid mail
during the first year of warranty; thereafter the mailing cost is to be paid by the recipient.
Potentiometers have a limited lifetime and are not covered by the manufacturer for more than
normal use. For all service enquiries, refer to your local distributor, as he is best able to help you.