Operation Manual

USB 7337 - 7338 - 7339
‘Black Sabbath’ CD Players
1. HEADPHONE JACKS
Used for connecting headphones.
2. JOG & SHUTTLE WHEELS
Shuttle: Use the dial to select the scanning direction and speed. The disc is scanned in forward
direction when the shuttle dial is turned clockwise from the neutral position and in the reverse
direction when the shuttle dial is turned counter-clockwise. The scanning speeds up when the
shuttle dial is tumed faster.
Jog: ln pause mode, if you turn the jog, the point at which the sound is being
produced moves by a number of frames corresponding to the number of clicks. Clockwise moves
the point forward, counterclockwise moves the point backward.
In play mode ,the jog increases or decreases the speed of the song.
(clockwise : increase, counter-clockwise: decrease).
3. TIME BUTTON
Use this button to choose the time mode: Elapsed time, remaining time or total remaining time.
4. REPEAT BUTT
ON
Use this button to repeat one track or all the tracks of the CD.
5. IN BUTTON (LOOP SYSTEM)
This button sets the beginning of the loop. The loop indicator flashes on the display.
6. ROBO/SINGLE/CONTINUE
Press these to switch between the SINGLE and CONTINUOUS play mode. The selected mode
is indicated on the LCD screen. In SINGLE mode the unit stops after each track. In CONTINUE
mode, the unit reads all track and stops.
7. PROG BUTTON
You can program several tracks (20 tracks max.):
- Press the PGM button to enter the program mode.
- Use the skip track buttons to choose the track you want, then press the PGM button
- Repeat the operation to select all the tracks you want.
- Press the play / pause button to start the playback.
8. OUT BUTTON (LOOP SYSTEM)
When you press this button, you set the end point of the seamless loop and you start the loop.
To finish the loop, press this button again.
9.
TRACK SELECT
BUTTONS
Pressing 0-9 buttons, allows you to select tracks directly.
10. RELOOP BUTT
ON (LOOP SYSTEM)
This button is used to start the last saved loop.
11. SKIP |<< BUTTON
Use this button to re-start the track or to select the previous track.