Operation Manual

USB 7392 - 7393

Microphone systems

WIRELESS MICROPHONE

hen, pull open handle to reveal the transmitter's lcd monitor.

NOTE: When pulling out handle, make sure that you pull it straight out.

Then, to change the settings, press “SET” to switch to the mode you want to adjust on the transmitter, and

up and down to select. Press “SET” again to confirm. when the battery is low, the light above the lcd screen

will be flashing.

To modify the other modes, press "SET" to that mode and the up or down button to select the adjustments.

Press ”SET” again to confirm.

NOTE: Match your frequency on the transmitter to those on the receiver(s) for a better signal.

NOTE: If y

ou do not press ”SET” to confirm no adjustments will be made.

NOTE: Damage due to improper usage will v

oid y

our warranty.