User manual

5
1.2 Getting started
1.2.1 Set-up
Inserting or removing the SIM card and microSD card
You must insert your SIM card to make calls. Please power off your
device before inserting or removing the SIM card and microSD card.
Your device only support micro-SIM card. Please contact network
operator and use professional scissors prune SIM card to micro-SIM card.
To install, take off micro-SIM card protector, insert the micro-SIM
card into the slot with chip facing downward, and then cover the slot.
To remove the card, open micro-SIM card protector, gently press it
out, and then cover the slot.
Steps for removing and installing microSD card are the same with
steps for micro-SIM card.
Charging the battery
Connect the battery charger to your device and mains socket
respectively.
The charging status bar will not float if your battery
is fully consumed. To reduce power consumption and
energy waste, when battery is fully charged, disconnect your
charger from the plug; switch off Wi-Fi, GPS, Bluetooth or
background-running applications when not in use; reduce
the backlight time, etc.
IP4931_P330X_QG_Eng_GB_12_140604.indd 5IP4931_P330X_QG_Eng_GB_12_140604.indd 5 2014-6-4 下午 3:52:362014-6-4 下午 3:52:36