0' x 8' Assembly Instructions STOP READ THIS FIRST! STOP BEFORE BEGINNING ASSEMBLY: 1. Remove parts from boxes and make sure all parts are present and in good condition. 2. Review the suggested tool list below and ensure you have the right tools ready before beginning assembly. 3. Two adults are required for assembly, although it is recommended a third adult be available as an instruction reader. 4.
10' x 8' Assembly Instructions 10' x 8' x 8' Outdoor Shed Model # 157479 READ THIS PAGE BEFORE ASSEMBLY OF YOUR NEW SHED Reminder: Please mail the registration card provided with your instructions. Building Code Notice: Consult at local building codes, as well as city, county, and state ordinances to ensure that the contruction of this shed does not require a building permit. Proper documentation and approvals may also be required by your neighborhood.
10' x 8' Assembly Instructions Site Preparation and Foundation Construction NOT SECURING TO A FOUNDATION MAY VOID THE WARRANTY. If you would like to build a concrete base for your shed, we recommend a 10' 2" x 8' 2" base for your shed. As home center or hardware store for more information.
10' x 8' Assembly Instructions Parts List for the 10' x 8' x 8' Shed Plastic Parts: Part Name Part Letter Quantity Part Name Part Letter Quantity Center Floor Panel CF 2 Rear Center Left Panel without Flange RCL 1 Center Gable Panel CG 2 Rear Center Right Panel with Flange RCR 1 Corner Lock CL 8 Right Door RD 1 Exterior Door Handle DH 2 Right Floor Panel RF 2 Door Plug DP 4 Right Gable Panel RG 2 Front Panel FL/FR 2 Roof Panel RP 6 Gutter Wall Connector GC 4 Rear P
10' x 8' Assembly Instructions LF RF 2 - Left Floor Panel LWS FL/FR WL WR LG 2 - Left Gable Panel RR/RL 2 - Right Window Handle RCR 2 - Rear Panel DH CG 4 - Door Plug H LP 6 - Door Hinge 2 - Center Gable Panel 2 - Door Latch Pin RG 2 - Right Gable Panel -5- 1 - Rear Center Left Panel without Flange DP 2 - Left Door without Flange 2 - Exterior Door Handle RCL 1 - Rear Center Right Panel with Flange LD RD ID RWH 2 - Left Window Handle 2 - Right Window Panel 1 - Right Door
10' x 8' Assembly Instructions Parts Identification with Quantity (Continued): RP SK 6 - Roof Panel SP 2 - Sky Light GC 2 - Sky Light Plug CL 8 - Corner Lock PS 36 - Plastic Screws TC 4 - Gutter Wall Connector 2 - Truss Connector 25.5" SE 1 - Standard Extension 62.5" RC 4 - Roof Truss Channel 72" SS 7 - Shelf Standard Support 59.8" RB 2 - Roof Truss Brace 40.5" WGS 4 - Wall Gable Support 30" RS 6 - Roof Support 66.
10' x 8' Assembly Instructions This step requires: Step 1: Assemble Floor 2 - Right Floor Panels (RF) 2 - Center Floor Panels (CF) 2 - Left Floor Panels (LF) 16 - #10 x 3/4" Phillips Washer Head Screws LEVEL FLOOR SURFACE REQUIRED Step 1a: ! Snap together a Left Floor Panel (LF) to a Right Floor Panel (RF). LF RF Step 1b: Snap together two (2) Center Floor Panels (CF). Repeat for the remaining Left Floor Panel (LF) and Right Floor Panel (RF).
10' x 8' Assembly Instructions Step 1c: One of the assemblers should stand on the Center Floor Panel (CF). The second assembler should slide the Right Floor Panel (RF) alongside the Center Floor Panel (CF) and raise it to a 45º angle down to the Center Floor Panel (CF) on the ground. Using a rubber mallet, tap the Right Floor Panel (RF) firmly until it pops into place. This step hardware: Repeat with the Left Floor Panel (LF) on the other side of the Center Floor Panel (CF).
10' x 8' Assembly Instructions Step 2: Assemble Front Corner This step requires: Place Left Window Panel (WL) into the side left corner and lock into position using Plastic Screws (PS x 2) with Lock Washers (x 2).
' x 8' Assembly Instructions Step 2b: Place Front Panel (FR) into front left corner aligning the top corner with Left Window Panel (WL). Lock into position using Plastic Screws (PS x 2) with Lock Washers (x 2). This step hardware: FR 2 - Corner Locks (CL) 2 - Lock Washers 2 - Plastic Screws Step 2c: 6 Insert Corner Locks (CL x 2) by sliding down into locked position.
10' x 8' Assembly Instructions This step requires: Step 3: Assemble Shuttered Window Panel 2 - Left Window Shutters (LWS) 2 - Right Window Shutters (RWS) 2 - Left Window Handles (LWH) 2 - Right Window Handles (RWH) 2 - Window Panels (WP) 2 - Plastic Screws (PS) 2 - Lock Washers Step 3a: Snap Left Window Handle (LWH) into position. Repeat attaching Right Window Handle (RWH) into Right Window Shutter (RWS). 2x Step 3b: IMPORTANT! Read this step carefully.
10' x 8' Assembly Instructions Step 3c: Place Window Panel (WP) next to Left Window Panel and lock into position with Plastic Screws (PS X 2) and Lock Washers (x 2).
10' x 8' Assembly Instructions This step requires: Step 4: Assemble Wall Panels Step 4a: Slide Right Window Panel (WR). and lock into position with Plastic Screws (PS x 2) and Lock Washers (x 2).
10' x 8' Assembly Instructions Step 4c: Insert Corner Locks (CL x 2) by sliding down into locked position. This step hardware: RL Slide Down Push 1 6 - Corner Locks (CL) NOTE: click 2 Second person should apply pressure on opposite side of wall for easy insertion of Corner Locks (CL) Corner Lock hooks must face down Step 4d: Continue assembling the next three Wall Panels (WP) in the following order: 1. Rear Center Left Panel (RCL) 2. Rear Center Right Panel (RCR) 3.
10' x 8' Assembly Instructions Step 4e: Place Left Window Panel (WL) and lock into position with Plastic Screws (PS x 2) and Lock Washers (x 2). Insert Corner Locks (CL x 2) by sliding down into locked position. Push Slide Down WL 2 Corner Lock hooks must face down 3 1 NOTE: Second person should apply pressure on opposite side of wall for easy insertion of Corner Locks (CL) Step 4f: Place the second Window Panel (WP) and lock into position with Plastic Screws (PS x 2).
10' x 8' Assembly Instructions Step 4g: Place Front Panel (FL) and lock into position with Plastic Screws (PS x 2) and Lock Washers (x 2). Insert Corner Locks (CL x 2) by sliding down into locked position.
10' x 8' Assembly Instructions Step 5a: This step requires: Step 5: Assemble Side Shelf Standard Supports 4 - Gutter Wall Connectors (GC) 4 - Shelf Standard Supports (SS) 4 - Hex Head Bolts 1/4" x 1/2" 12 - #12 x 1 1/2" Phillips Washer Head Screws 4 - Hex Nut 1/4" Fasten Gutter Wall Connector (GC) to Shelf Standard Supports (SS) with Hex Head Bolt 1/4" x 1/2" (x 4). This step hardware: Repeat this step four (4) times. Hex Head Bolt 1/4" x 1/2" Shelf Standard Support (SS) with Bolt and Nut.
10' x 8' Assembly Instructions Step 5b: Place assembled Shelf Standard Supports (SS) into position and fasten with #12 x 1 1/2" Phillips Pan Head Screw in the three (3) holes supplied. Right Hole 1 2 This step hardware: x4 4 - #12 x 1 1/2" Phillips Head Screws NOTE: Second person should apply pressure on opposite side of wall for easy insertion of Shelf Standard Supports (SS) NOTE: Shelf Standard Supports (SS) should be assembled and fastened to the wall one at a time.
10' x 8' Assembly Instructions Step 5c: Continue to assemble Shelf Standard Supports (SS) into position and fasten with #12 x 1 1/2" Phillips Head Screw in the three (3) holes supplied.
10' x 8' Assembly Instructions Step 6a: This step requires: Step 6: Complete Shelf Standard Support Assembly Connect, using Hex Head Bolt 1/4" x 1/2", Shelf Standard Supports (SS) and Standard Extension (SE). 2 - Shelf Standard Supports (SS) 1 - Standard Extension (SE) 1 - Hex Head Bolt 1/4" x 1/2" 9 - #12 x 1 1/2" Phillips Pan Head Screws This step hardware: Hex Head Bolt 1/4" x 1/2" Hex Nut 1/4" Step 6a: Connect, using Hex Head Bolt 1/2", Shelf Standard Supports (SS) and Standard Extension (SE).
10' x 8' Assembly Instructions Step 6c: The last Shelf Standard Support (SS) should be placed in position and fastened to the wall using the left Standard Support screw holes.
10' x 8' Assembly Instructions This step requires: Step 7: Assemble Roof Frame Step 7a: Connect two (2) Roof Truss Channels (RC) together with a Truss Connector (TC) and four (4) Hex Head Bolt 1/4" x 1/2" This step should be completed twice (x 2).
10' x 8' Assembly Instructions Step 7b: Attach a Roof Truss Brace (RB) to the assembled Roof Truss Channel (RC). Line up holes and connect two (2) Roof Supports (RS) using Hex Head Bolt 1/4" x 2 1/2" on both sides of the Roof Truss Brace (RB). This step should be repeated four (4) times. The final two (2) assemblies in this step will connect the center Roof Supports (RS), making a single one piece frame.
10' x 8' Assembly Instructions This step requires: Step 7c: 2 - Sky Light Panels (SK) 1 - Sky Light Plug (SP) 4 - Hex Head Bolts 1/4" x 2 1/2" 4 - Hex Nuts 1/4" Bend or fold Sky Light Panel into a 45o angle. Place Sky Light Plug (SP) into Sky Light Panel (SK). Snap together two (2) Sky Light Panels (SK). This step hardware: 1 - Sky Light Plug (SP) SK NOTE: Skylight plug is the same color as the Doors (RD & LD).
10' x 8' Assembly Instructions Step 7e: ! WARNING! Two (2) people should be used to lift and place Roof Frame into position. Roof Frame will slide into Gutter Wall Connectors (GC) assembled in Step 5. While one person holds the frame in place, the second person should fasten Roof Frame to the Gutter Wall Connectors (GC) attached to the Shelf Standard Support (SS). Using Hex Head bolt 1/4" x 2 1/2" this connection should be repeated four (4) times.
10' x 8' Assembly Instructions This step requires: Step 8: Roof Gable Assembly 2 - Right Gable Panels (RG) 2 - Left Gable Panels (LG) 2 - Center Gable Panels (CG) 2 - Gable Long Shelves (GLS) 2 - Gable Short Shelves (GSS) 12 - Plastic Screws (PS) 1 - Gable Support (GS) 16 - #12 x 3/4" Phillips Pan Head Screws Step 8a: 1. Place Center Gable Panel (CG) on the floor (outside facing down) and snap into position a Right Gable Panel (RG) and a Left Gable Panel (LG). 2.
10' x 8' Assembly Instructions Step 8b: Slide and snap assembled Gable into position on the Front and Back Walls. NOTE: The Rear Gable assembly will slide onto the Center Shelf Standard Support Extension.
10' x 8' Assembly Instructions Step 8c: Once Gables are in place, snap the Sky Light (SK) ends into position over the top of the Center Gable Panel (CG). NOTE: For proper assembly it is important that the ends of the Sky Light (SK) are snapped into position over the top of the Center Gable PANEL (CG).
10' x 8' Assembly Instructions Step 8d: 1. Fasten center shelf standard extension to the Back Gable using #12 x 3/4" Phillips Head Screw. 2. Fasten two (2) Plastic Screws in the upper side of each panel.
10' x 8' Assembly Instructions Step 8e: Next connect the Roof Supports (RS) to the Front and Back Gables using four (4) #10 x 3/4" Phillips Washer Head Screws.
10' x 8' Assembly Instructions Step 8f: Slide Wall Gable Support (WGS) into position and fasten #12 x 3/4" Phillips Pan Head Screws in all four (4) locations noted below.
10' x 8' Assembly Instructions Step 8g: Attach Gable Support (GS) to Front Gable assembly only using #12 x 3/4" Phillips Pan Head Screws.
10' x 8' Assembly Instructions This step hardware: Step 9: Roof Assembly Step 9a: Slide Roof Panel (RP) into track and push into the Sky Light (SK) until locked in position. (Snap should be aligned before applying pressure to insert the snap into locked position.) This should be repeated six (6) times until roof is complete. 6 - Roof Panels (RP) NOTE: click RP Second person should apply downward pressure on opposite side of the Sky Light (SK), while roof panels are pushed into place.
10' x 8' Assembly Instructions This step requires: Step 10: Door Assembly Step 10a: 1. Slide and snap Door Plugs (DP) into top and bottom of the Door Panel. 2. Snap Door Hinge (H) into position and fasten using #12 x 3/4" Phillips Pan Head Screws.
10' x 8' Assembly Instructions Step 10b: Attach assembled Door Panel to the door frame using #12 x 3/4" Phillips Pan Head Screws. Repeat for other door. This step hardware: 6 - #12 x 3/4" Phillips Pan Head Screws NOTE: Snaps of hinges are for placement only. Second person should apply opposite pressure on hinge while other person is fastening screws into position.
10' x 8' Assembly Instructions Step 10c: 1. Slide Door Latch (LCH) into the Right Door Panel (RD) and fasten using the #6 x 5/8" Phillips Head Screws. Do not over tighten. 2. Slide Door Lock (DL) into Left Door Panel and fasten using #6 x 5/8" Phillips Head Screws. Do not over tighten.
10' x 8' Assembly Instructions Step 10d: 1. Slide Door Latch Pin (LP) into the track on the top and bottom of the Right Door Panel (RD).
10' x 8' Assembly Instructions Step 11: Insert Core Plugs Step 11a: Insert Panel Plugs (PP) and turn 1/4 turn. This step should be repeated 134 times. This step hardware: 134 - Panel Plugs (PP) NOTE: 1 2 3 - 38 - There are two extra Panel Plugs (PP) that will not be used.
10' x 8' Assembly Instructions 10 Year Non-Transferable Limited Warranty US Leisure, (“USL”) warrants to you the original purchaser of resin storage buildings manufactured by it (hereinafter referred to as “Products”), that subject to the terms and conditions herein contained, the Products are and will be free from defects in materials and workmanship that result in warping, rotting, corroding, flaking, peeling, blistering, or abnormal discoloration of surfaces.
10' x 8' Assembly Instructions While every attempt is made to embody the highest degree of safety in all equipment, freedom from injury cannot be guaranteed. The user assumes all risk of injury resulting from the use of this Product.
10' x 8' Assembly Instructions If the Product is determined to need full replacement, USL may refund the lower of a pro-rata portion of the purchase price as determined below or the advertised selling price of comparable Product at the time of adjustment. Pro-rata basis of the price is determined by the following calculation: 0-2 years of ownership, 100% refund of original purchase price. Over 2 years to 4 years of ownership, 80% refund of original purchase price.
10' x 8' Assembly Instructions Privacy Notice Effective: 8/1/2006 We care about our customers' privacy. We Do Not Share Customer Information With Anyone. In order to assist us in development of other products and to enable us to contact you in the event that an important product information update is released, please complete the enclosed product registration card and return it to us or visit us online at www.usleisureoutdoor.com to fill out the registration information there.
10' x 8' Assembly Instructions The Way We Use Information: We use the information you provide about yourself when placing an order only to complete that order. We do not share this information with outside parties except to the extent necessary to complete that order. We use the information you provide about someone else when placing an order only to ship the the extent necessary to complete that order. We use return email addresses to answer the email we receive.
US Leisure, 2369 Charles R. Jonas Hwy, Stanley, NC 28164 Phone Number: 1-877-638-7056, Ext. 1 - 44 - Made in USA REV.
04/15
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble I'
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
10' x 8' Instrucciones de Ensamble
