Instructions / Assembly

10' x 8' Assembly Instructions

- 11 -

Step 3: Assemble Shuttered

Window Panel

Step 3a:

Snap Left Window Handle (LWH) into position.

Repeat attaching Right Window Handle (RWH) into

Right Window Shutter (RWS).

This step requires:

2 - Left Window Shutters (LWS)

2 - Right Window Shutters (RWS)

2 - Left Window Handles (LWH)

2 - Right Window Handles (RWH)

2 - Window Panels (WP)

2 - Plastic Screws (PS)

2 - Lock Washers

2 x

NOTE:

Put aside one Window

Panel (WP) to be assembled

in Step 4.

Step 3b:

IMPORTANT! Read this step carefully. The shutter cannot be put in backwards or the pin will break.

Please follow these steps in order:

1. Connect Right Window Shutter (RWS), starting from bottom right corner of Window Panel (WP).

2. Insert Right Window Shutter (RWS) bottom peg into Window Panel (WP) and then snap Right Window

Shutter (RWS) upper peg into position.

3. Close and lock shuttered window (RWS).

Repeat to install Left Window Shutter (LWS).

NOTE:

Shuttered windows should be

attached from outside of the

Window Panel (WP).