Instructions / Assembly

10' x 8' Assembly Instructions

- 8 -

Step 1c:

One of the assemblers should stand on the Center Floor Panel

(CF). The second assembler should slide the Right Floor Panel (RF)

alongside the Center Floor Panel (CF) and raise it to a 45º angle down

to the Center Floor Panel (CF) on the ground. Using a rubber mallet,

tap the Right Floor Panel (RF) rmly until it pops into place.

Repeat with the Left Floor Panel (LF) on the other side of the Center

Floor Panel (CF).

Step 1d:

Fasten oor panels together using #10 x 3/4" Phillips head screw (16).

DO NOT USE DRILL ON THIS STEP.

angle

This step hardware:

16 - #10 x 3/4" Phillips Washer

Head Screws

NOTE:

Anchors are not

supplied for optional

oor anchor holes!

Optional oor anchor holes. (One on each corner.)

x 4