Installation Guide

34099 Melinz Pkwy Unit E - Eastlake OH – 44095 - 440-359-7200 - [e-mail] - http://uslightinggroup.com
Installation Manual
GFY-110 Series
GFY-110 Series LED tubes are designed to replace T8 fluorescent lamps in fixtures containing
standard G13 (bi-pin) sockets. Do not attempt to install in other types of fixtures.
Part Number Matrix
Model
Length, ft
Voltage,
Volts
Color Temp,
Kelvin
Cover
GFY-110-35-C
4
110
3450
CLEAR
GFY-110-35-D
4
110
3450
DIFFUSED
GFY-110-45-C
4
110
4500
CLEAR
GFY-110-45-D
4
110
4500
DIFFUSED
GFY-110-65-C
4
110
6500
CLEAR
GFY-110-65-D
4
110
6500
DIFFUSED
Please read this manual carefully before performing an installation.
WARNING: THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF
THE PRODUCT AND THE HAZARDS INVOLVED.
IMPORTANT: The tubes have to be connected directly to 110 VAC and not to the existing ballast in the
fixture. Connecting the tubes to the fixture without bypassing the ballast will permanently damage the
tubes and the fixture.
IMPORTANT: The electrical rating of these products is 110 VAC, the installer must determine voltage in
existing fixture prior to installation.
This Kit Includes:
 LED lamp
 Luminaire pressure sensitive label
 N label (neutral marking at lampholder terminal)
Application
 These LED tubes are suitable for installation in T8 standard luminaries with non-shunted
lampholders (rapid start ballasts).
 These LED tubes can’t retrofit original luminaries which use remote starter.